92 Circuit Racing in Australia for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
20 1
Roll CageLog Book
For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001. Also suitable for 3J Improved Production IPRA as logbooked naturally aspirated 3E cars are eligible as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely well built and features an
8
Ex Carlin F4 Professionally maintained Race Ready New clutch new belts Brand new radiator intercoolers oil cooler and lines all PWR Short and long gear ratios Spare springs pads and rotors Spare set of wheels Spare complete floor wing and bodywork New race harness 160hp ecu and 200hp ecu ( installed) Car stands available at extra cost
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.
5
Roll CageLog Book
V8 SuperUte for sale. Cars in great condition, few new things over the season break. - rebuilt engine by wall speed. Brand new heads, locked and sealed within series restriction - new diff centre - Brand new clutch - New axles Cars all fresh and ready for the season ahead. Only selling due to financial reasons. Will come with a list of spares such as new radiator, up rights etc. More then happy to get you into contact with the team at SuperUtes to sort you out in getting started. Pl
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
10
## Deposit taken## VL Commodore in SV Walkinshaw Body Kit - HRT livery Log Booked Sport Sedan and IPRA Fully complied CAMS roll cage LS2 Engine Magnum 6060 6 Speed Gearbox 9" Ford Diff Brembo Brakes all round 18" wheels Suspension upgrades Professionally wired to include Motec instrument panel and Haltech IQ Dash. Excellent condition and now being offered for sale due to lack of use. This car deserves to be used and would make a great car for the blossoming replica / tribute category. The car
22
2003 Holden Monaro CV8 series2 Circuit Racing No expense spared Professionally prepared, turn key & Ready Experience the excitement of the track with this exceptional car and enjoy track life LS 6LTR Engine (25hrs only) Curl Over-race springs, adjustable suspension. Bembro brakes, 6 piston front& 4 piston rear. Motec PDM Motec digital Dash 2 Battery isolation switches Cobra seat RPM Harness Roll Cage Diffs true track 3-5 Ratio Race tyres.
16
Roll CageLog Book
Team Dynamic VY Commodore Chassis #001, driven by Jason Richards. Recently restored. Fresh Engine 0km Fresh Ohlins Shocks 0KM Professionally prepared, turn Key and ready for Kumho V8 Series, currently presented in 2003 Richards #45 livery, a very clean and well presented car. Spares package included.
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo
18
Roll CageLog Book
FOR SALE V8 5ltr 304 stroker engine with 650 double pumper Holley carburettor Pacemaker headers with side pipes Strut brace Power steering cooler 9.5lt winged sump 6 speed Tremec gearbox 10 bolt LSD Bilstein shocks all around Fully seam welded Near new Wilwood front callipers, VL callipers on rear 6 point welded cage Wired to rally safe standards 80 litre fuel cell 6 point harness 17 x 8, 17 x 10 custom Simmons Velo seat Log booked for both CAMS & AMSAG Presents very well for the money. Jump i
10
Ve commodore race car. Cage built to national standards and cams approved with all relevant certification,tilton pedal box,fuel safe fuel cell,completely resprayed inside and out including engine bay and inside boot in debeer 2k. Vehicle IS NOT A REPAIRABLE WRITE OFF and has had no body damage at all. Would be an excellent start for someone wanting quality race car. All cams work carried out by Garage 1 here in Victoria.
20
Roll CageLog Book
Holden lj torana historic touring car , 295 hp 202 roller cam engine full girdle bottom end blue motor crank matched ported intake and exhaust triple 45 dcoe webers electronic ignition , centre throw hydraulic clutch , L34 ratio gearbox spare m21 gearbox , diff full spool 3.08 3.36 3.55 strengthened main caps 28 spline axles adjustable pedal box BMW vented front discs Volvo 4 spots , large adjustable koni shocks king springs, 2 sets 13x7 hot wires plus 1 set 13x6 hot wire with wets
4
Roll CageLog Book
The car was built by Paul Morris Motorsport, chassis No. ‘Kulwicki’ for the 2009 Championship Series, driven by Russell Ingall in Supercheap Auto livery. Please contact us for pricing and more information.
19
Roll Cage
Vz commodore race car, this car is a newly built car everything on the vehicle is basically new I have only completed 1 event. Running gear: diff has been rebuilt with tru track centre with 3:7 gears, trans is standard, engine had full rebuild, honed block,rings,bearings reco heads with springs to match the new crow race cam and hand ported, trunnion upgrade, mellings oil pump, 92mm throttle body, sheet metal intake, ally radiator,moroso oil accumulator Ecu: standard ecu with stand alone wiri
7
WAU WR024 Unique opportunity to own a piece of Supercar History. Scott Pye’s race winning ZB Commodore Supercar is now on the market and ready for its next chapter. Raced by Scott Pye, Warren Luff and Bryce Fullwood. Restored by WAU to 2018 Albert Park race winning livery this car is eligible for super 2 or alternatively would look right at home in any car collection.
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.
4
Roll CageLog Book
IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new
10
Saloon Car Fresh nut and bolt ground up build, with everything new, rebuilt or serviced. Too much to list, never crashed. Rowse motor, Top HP on E85, MSA log booked and SCRA sealed. Built by very experienced and competitive Saloon Car team. Unfortunately has to sell to make space for another project so my loss is your gain. Turn key start in what many regard as Australia’s best bang for buck racing category, can come with track support for new drivers.