40 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
3
Professionally maintained by BF Racing in Gold Coast, QLD Race Ready and proven quick car Mygale M14-F4 with160hp ecu and 200hp ecu (currently installed) All manufacturer updates Complete floor with keel Skid wood Reference wood Discs Rear wing complete Sets new brake pads Set of spare rims with wets fitted one session (Phillip Island) Front push rod Rear push rod Front track Rear upper Right hand rear lower Left hand rear lower Right hand front lower Front main plane Update sheets Short gear ra
2
Log Book
2023 AFO Champion winning car 2021 Imported from Top UK Team Has always been serviced an race prepared by Tim Macrow Racing Comes with 28 extra gear ratios & new dogs & gear box tools 4 extra sets of wheels & wheel nut socket 317 front nose up grade & std nose over $17000 of new parts engine preheater & fuel drain kit & jump starter two sets of stands Low an high
10
Roll CageLog Book
FOR SALE - 2014 Nissan 370Z Production Touring Car. This car has been built to Motorsport Australia Group 3E Production Touring regulations complete with Motorsport Australia approved roll cage, Motorsport Australia log book and a AASA log book. It has just over 5000kms on the odometer since new. Mechanical - This car has a powerful 3.7L V6 twin throttle body engine with twin pod air intakes, extractors and a full exhaust system which sounds amazing. It gets the power to the ground via a bra
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
9
Roll Cage
Repainted in Mazda yellow Lexan windows Gt carbon fiber wing Carbon fiber wing uprights Carbon fiber front splitter Cds steel weld in roll cage 18x7.5 front 18x9 rear wheels Yokahama advan Ao50 tyres Adjustable front camber arms MCA red coil overs with custom valving and spring rates. Is300 diff and half shaft upgrade Ft86 torsen diff 4.3 Porsche 997 cup car brake upgrade 365mm rotors Circo front pads Project mu rear pads Tilton floor mounted pedal box External reservoirs Woodward ra
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
10
Roll CageLog Book
Race ready! Regretful sale of my Mygale formula ford and spares due to life commitments. Vehicle is a 1995 Mygale SJ95 Formula Ford with a Ford Kent Crossflow engine. It is chassis number 2 which is pretty awesome for a collector and it's an ex-Team Australia car. Would be an awesome collectors item. Vehicle was purchased mid 2023 and was brought up to spec to compete in 2024 with a new dash, rain light, and other misc bits. Has only done a single test days in my possession and drove great but
5
Roll CageLog Book
Dallara F308-11 for sale. Car has been previously raced in Australian Formula 3 now Australian Formula open. It has been maintained to a high standard. This car is an has had multiple podiums and is extremely fast and competitive. It also comes with an extensive spares package, including 3 sets of wheels, air jacks, complete front nose box and wing, etc. We can also offer a full package with a truck which can carry 2 cars either 1 sedan and and open wheeler or 2 open wheelers, or truck separa
4
Last F304 ever made with dual front shocks and long wheelbase. Engine has done less that 1000km since rebuild with upgraded current valvetrain and conrods. Just had the $11000 geartronics paddleshift system with auto blip. Comes with a good amount of spares including arms, nose box, front wing, 2 spare sets of wheels etc. All work done by R-Tek services. Call Bo 0404 873096
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
8
Ex Carlin F4 Professionally maintained Race Ready New clutch new belts Brand new radiator intercoolers oil cooler and lines all PWR Short and long gear ratios Spare springs pads and rotors Spare set of wheels Spare complete floor wing and bodywork New race harness 160hp ecu and 200hp ecu ( installed) Car stands available at extra cost
8
Roll CageLog Book
Selling my 2011 Dallara F308 with Neil Brown Engineering Engine. Car was run by T-sport and won the 2012 British F3 National class. Car has run very successfully in the NSW formula race car championship. Engine had under 1000km on it so plenty of life left with rebuilds recommended around 5000km but have seen them up to 7000km. Car come with spare front wing.
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
6
Roll CageLog Book
Australian Formula 2 Carbon Fibre race car with a Motorsport Australia Historic COD, that is ready to race and not a cent to spend on it. Including new wets and Hoosier slicks (unused) This car was imported into Australia as a roller, after only 6 months racing as a F3 in England with Edenbridge Racing. It was converted to Australian Formula 2 VW golf powered and first competed in 1996. The original log book has only 4 entries between 1996 and 2002, and was then stored for 20 years. The car was
13
Roll CageLog Book
FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt