83 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
20
Registered
Genuine V8 SS, mostly built and maintained by Ron Misssen before he retired (Ron has built quite a few famous Bathurst & Championship winning Touring Cars). Car is road registered as a Tarmac Rally Car and is log booked with Motorsport Australia. I developed the car mostly for track days/hill climbs/super sprints etc. but it has only been used on test and tune days so everything is fresh. Some specs below; Full custom-made, ball jointed and solid mounted front end including MCA adjustable coilo
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
9
Roll Cage
Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.
27
Roll CageLog Book
Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017
10
Genuine original VF Craig Lowndes Commodore, No.69 of 233. Built to National 3E Production Touring Car spec by Racebred Engineering using the best components including Murray Coote suspension, Motec, Bond enduro fuel tank, diff cooler, firebomb, cool suit equipped and much more. This is an immaculate, well sorted, competitive car that is eligible for a variety of state and national race categories. Call Scott 0413 254 962.
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.
12
Roll CageLog Book
IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.
6
Roll CageLog Book
Audi TCR RS3 LMS 2019 Model Fully Maintained by Track Tec Racing to full Audi Spec No Expense spared Never had Accident damage Race Winning Car Ideal 1hr Endurance car Comes with 8 rims & 12 tyres including new set of wets Car is located in Cromwell , Otago , NZ
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
10
Lc Torana race car cams log booked Engine, fully forged rb30/25 turbo have all receipts for engine build 35/82r turbo 38mm tial waste gate running mild boost and around 600hp R33 5sp gear box full built for race with brass button clutch Fuel system 1 x 048 lift pump 3 ltr swirl pot and 2 x 048 feed pumps to 1000cc injectors and spitfire coil packs all controlled by a Haltec pro platinum EMS on AV gas Rear end is a adjustable 10 bolt Borge Warner 38spline billet axels with full spool all bui
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
9
Roll CageLog Book
Holden Torana LJ Race Car, or Road Car. Group N race car. 2 door (getting rare these days) Can be converted to a road car. Owner can assist with road registration. Full Log Book with Race history. 202 quality motor with Triple 2" SU's. Fresh M21 gearbox. BMW discs with Volvo 4 spot calipers. Koni shocks. Full steel welded cage. Quality paint respray. Billet fine spline rear axles, matched to mini spool diff. Full braided, tefflon fuel lines and filters; tuned to run on the latest high octa
10 1
Roll CageLog Book
SUZUKI Cappuccino 1993 fitted with full house Swift GTI 1300cc motor, Sierra / Jimny hybrid 5 speed trans, Subaru R160 diff with Kaaz mech LSD Currently set up as a track car. Not roadworthy and cannot be registered without full engineering certificate. Has Grey import compliance plate. Some video in action https://www.youtube.com/watch?v=nml_GdRnq_g https://www.youtube.com/watch?v=qhkl-r2dSXI Price is negotiable Contact Jeremy for further detail
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
10
Registered
Clubsport R8 tourer 2012, manual.I have owned this vehicle for the last 8 years and all modifications have been done in those years. It’s making a safe 600rwhp and 990nm on pump 98. It was the wife’s daily driver when she was working but has not worked for a few years and since then has only been a weekender when we have the spare time. It has always been garaged and washed and serviced regularly. List of some Modifications are: -VCM 714 cam package -Magnuson heartbeat 2300 supercharger -NPC d
10
Roll CageLog Book
Hoppy built ex NZV8. Holden 355 Stroker producing just over 500 hp at the fly wheel. TTi 5 speed sequential gear box. Upgraded front brakes and bigger rotors. Running 18x9.5 rims so tyres easy to get. Motec dash that works with beacon. Brand new truetrac diff. No expense has been spared on the upgrades to this car and it is now a front running GTRNZ GT3 car and last time out at manfield did a 114.3 on old tyres. It’s time to move up to GT2.
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.
10
## Deposit taken## VL Commodore in SV Walkinshaw Body Kit - HRT livery Log Booked Sport Sedan and IPRA Fully complied CAMS roll cage LS2 Engine Magnum 6060 6 Speed Gearbox 9" Ford Diff Brembo Brakes all round 18" wheels Suspension upgrades Professionally wired to include Motec instrument panel and Haltech IQ Dash. Excellent condition and now being offered for sale due to lack of use. This car deserves to be used and would make a great car for the blossoming replica / tribute category. The car
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar