27 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
10
Roll Cage
Audi TT-RS 5 Cylinder Race Car - Rare Manual 6Spd -AGI Half Cage -Sparco Circuit Seat -Audi Active adjustable damper system - Exhaust and Tune making good HP - 2 Piece Rotors and Pads F/R - 6x Forged wheels with Semi Slicks - very good mechanically with lots of upgrades, Maintainance records - Comes with original Seats if wanted -Trailer Available for extra $ - Open to swap/ trades - Can assist with transport and finance
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
9
Roll CageLog Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
14
Registered
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
5 1
Roll CageLog Book
High-Performance Queensland HQ Holden Circuit Racer! Looking for a podium-worthy racing machine to dominate the circuit? Your search ends here with this Queensland HQ Holden Circuit Racing Car! With its impressive track record and championship-level performance, this beast is ready to take your racing experience to new heights. Key Features: Category: 3H Consistently Top Running Since 2017 - Proven Track Record! Finished in the Top 10 at the QLD HQ Nationals 2023 @ Morgan
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
9
Roll CageLog Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
13
Roll CageLog Book
FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt
8
Roll CageLog Book
Audi RS3 LMS TCR Chassis #144 - Highest Spec Audi of this model in Australia (4 in the country) - Sold new to Australia in 2019 - Previously driven by Garth Tander and JK Vernay (2019 QR Pole & Race win) - Every homologation update installed including Aero front bonnet catches, front, rear & side plastic windows (only Gen1 in Aus with these updates) - Ohlins Shock Absorbers installed, tuned and recently serviced by AD Racing Shocks ($25,000 new price, plus custom valving) - Multiple podiums in 2
6
Roll CageLog Book
For Sale Complete car less engine and gearbox. Or happy do discuss turn key package. Car will come with everything required to fit SR20 turbo. Motorsport Australia log booked available with the following, 12 forged buddy club wheels, Brembo brakes, Bond weld in cage, MCA triple adjustable shocks rebuilt with latest valving eibach springs, Motec ECU, full external fuel system, nismo LSD. Spares include coilover springs, bumper, brake pads, axles hubs.
19
Roll CageLog Book
Nissan R33 V spec GTR Was built from a STD Car Ground up , It has been built and revised over the years for WTAC but could be easily raced in Sports sedans with minimal mods Only the Best of the best parts have been used Engine Bullet Billet 3L Block Built by MOSTECH in qld and only done one WTAC 2022 since build 3.2 Stroker Supertech Dual Springs with Titanium Retainers OS Giken Cam Gears Avaid Dry sump pump with ross Billet 2WD Pan Peterson 3 Gallon Oil Tank Cam and crank Trigger
9
Log Book
Perfect base for IPRA build/24hr Lemons/ BEERS/ Cheap Car Challenge and similar budget enduro racing series SR20 and 5 speed, both in good condition Full service done including all fluids, filters and spark plugs Weld in Rod Kilby full cage with intrusion bars Kilby modified bride seat runners (driver and passenger) - allows for easy driver changes Race seat and 3 inch harness Brand new DBA rotors Brand new Winmax pads front and rear Brand new braided brake lines Brand new front camber pins Bra
14 1
Roll CageLog Book
Honda Integra DC5 Type R – Production Touring car Extensive history with Bathurst 12 hour class victories, Amchamps class victories and State class victories to its credit. Clean car and maintained (to a high standard) more than it is driven. Originally built from a brand new 0klm shell by Conroy Motorsport, it is a satisfying car to drive and makes a noise that would put a smile on anybodies face! This is a highly competitive car in its class, and would make an exceptional base for the Bathurst