79 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
5
1969 Chevy Camaro top sportsman super sedan drag car 540 stack injected big block 2 speed power glide New tires brand new electrical right through car Brand new floor IHRA tech About 12 passes since engine was freshened Awesome consistent car to race
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
7
Roll Cage
2006 Z28 Camaro Funny Car, N/A Methanol mechanical injection, 665BBC, has been running in modified, best time 7.76. Dart heads, Jesel rockers, Dominator TC, Brodix block. Supaglide Reid 2 speed box - 1.80 straight cut gear set, turbo input shaft, 8 top gear clutches, transbrake. 9 inch Strange full floater rear end. Engine and box have been freshened up ready for season but hasn't been run since 2019. Fire suppression, 2x chutes, Supajax car jacks + custom tools and trays for car for easy set up
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
9
Roll CageLog Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES
13
Roll CageLog Book
FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt