SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

76 Circuit Racing for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

Padstow NSW, Australia
Share
Watch
10
Roll Cage
2004 ST170 Ford Focus 6sp Manual Duratec ST 2.0ltr 170bhp stock engine Brad Stacey WA CAMS Registered 4pt Weld in cage. Vibratechnics Race Engine/Box Mounts Battery Relocate tray in cab fitted, Battery still under bonnet. Custom air intake. Timing Belt replaced Water Pump replaced Bespoked Engineering Billet Thermostat kit (not fitted) Raceworks 2ltr Catchcan with fittings (not fitted) + PCV Adaptor to suit engine. Cosworth Tuned Headers in heat wrap. MSD Coil & 8mm Leads Iridium Plugs Bonnet &

Cooma NSW, Australia
Share
Watch
9 1
Roll Cage
Log Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe

Launceston TAS, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Kanwal NSW, Australia
Share
Watch
1
Roll Cage
Log Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.

Wheeo NSW, Australia
Share
Watch
5
Roll Cage
Log Book
V8 SuperUte for sale. Cars in great condition, few new things over the season break. - rebuilt engine by wall speed. Brand new heads, locked and sealed within series restriction - new diff centre - Brand new clutch - New axles Cars all fresh and ready for the season ahead. Only selling due to financial reasons. Will come with a list of spares such as new radiator, up rights etc. More then happy to get you into contact with the team at SuperUtes to sort you out in getting started. Pl

Narangba QLD, Australia
Share
Watch
7
Roll Cage
Log Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

Glenwood NSW, Australia
Share
Watch
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.

Launceston TAS, Australia
Share
Watch
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing

Marrickville NSW, Australia
Share
Watch
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

North Lakes QLD, Australia
Share
Watch
9
Was $15,500$14,500
Roll Cage
Log Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts

Oatley NSW, Australia
Share
Watch
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump

Gosnells WA, Australia
Share
Watch
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S

Adelaide SA, Australia
Share
Watch
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo

Rockhampton QLD, Australia
Share
Watch
10 1
Registered
Log Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1

Menai NSW, Australia
Share
Watch
5
Roll Cage
Log Book
WA Production Car Championship Winner 2022 Season Motorsport Australia Log Booked Whiteline coilovers AGI Rol Cage Turbo Back Exhaust Winmax Pads Velo race seat (3 meets old) with OMP Harness Radum dual catch cans Braided brake lines Oil cooler kit Mountune baffled sump 2x sets of 18" wheels with A050 Tyres More pics will be uploaded soon

Wanneroo WA, Australia
Share
Watch
13
Roll Cage
Log Book
FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt

Mittagong NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Sports sedan RX7 log booked 3D 3rd nsw sports sedans 2022 division 3 2023 nsw sports sedans division 2 category winning car. Car is compliant in multiple categories, including but not limited to. SUPER TT.. SPORTS SEDANS.. SUPERSPRINT SERIES.. TIME ATTACK.. HILLCLIMB.. DRIFTING.. LS 6.0L dry sumped engine built by troy at WARSPEED making close to 700 engine HP Dedicated E85 set up with custom internal surge fuel cell Tremec TR6060 gearbox modified VY trutrac modified diff centre solid m

Weston NSW, Australia
Share
Watch
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.

Werrington County NSW, Australia
Share
Watch