43 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
11
Roll Cage
Honda Integra DC2 Race car. Built from a road car throughout 2015/16 (with new engine this year). Completed a total of 4 events in 8 years so due to this inactivity the car is offered for sale. Body is a straight rust/accident free shell. Has a full bolt-in alloy roll cage, Sparco Evo race seat and Schroth harness. Engine is an Abe Race Engines built B Series 1800cc in a mild state of tune. Runs Supertech hi-comp pistons, Toda B Spec cams, Skunk2 Throttle body/intake, baffled sump, Hardrace mo
6
Roll CageLog Book
Front running NSW MX5 Cup car. - NA motor built by Herring racing Bottom end one season old and head has only been run at one race meeting - New kaaz 1.5 way diff one round old - 6 speed gearbox rebuilt, one round old - Haltech Elite 1500 ECU - FRP short shifter - on 949 6UL. Multiple sets of wheels can and tyres can be negotiated with sale - near new high quality national spec cage built by ministry of fabrication - 9lives racing aero Has run 1.47 at SMSP GP track on old tyres. Capable
19
Roll CageLog Book
Now available at Muscle Car Warehouse is one of the most iconic and most successful Chev Monza to grace Australian circuits was the wild-looking Bob Jane sports sedan. It was the last car Bob Jane raced in anger, before hanging up his helmet. The big-winged monster, built with a liberal dose of Aussie ingenuity, was also raced by fellow greats Peter Brock, Allan Grice, Dick Johnson, Bryan Thomson and Brad Jones. It all started way back in 1978 for Bob Jane and this Monza in the United States aft
14 1
Roll CageLog Book
Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen
10
Roll CageLog Book
FOR SALE - 2014 Nissan 370Z Production Touring Car. This car has been built to Motorsport Australia Group 3E Production Touring regulations complete with Motorsport Australia approved roll cage, Motorsport Australia log book and a AASA log book. It has just over 5000kms on the odometer since new. Mechanical - This car has a powerful 3.7L V6 twin throttle body engine with twin pod air intakes, extractors and a full exhaust system which sounds amazing. It gets the power to the ground via a bra
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
9
Roll CageLog Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
8 1
RegisteredRoll CageLog Book
Need to sell - already bought another toy! 70,000kms - 2ZZ Engine (NA) Currently full rego in TAS (was a repairable write off but has been cleared and has full rego - have pics of damage/repairs from previous owner). Ex-Exige Cup race car with full cage, CAMS logbook etc. Ohlins shocks Bigger front brakes Spent 3k on new Extractors and exhaust New hollinger 3rd/4th gear upgrade. Fully serviced recently (all fluids) and wheel aligned. Super reliable cheap fun that can hassle much faster cars a
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
9 1
Roll CageLog Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
13
Roll CageLog Book
For Sale – 2014 Lotus Exige V6 350S, highly modified. This was a no-expense-spared build using the best of the best and would make an amazing weekend cruiser, track day weapon or even Production Sports race car. Previously road registered with only 14,000 original road kms, and now with a conservative E85 Tune is running around 450hp, this V6 Exige will would destroy many cars 5 times the price. Well over $150,000 spent on modifications. Features of this car include • Freshly built forged engine
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
9
Roll CageLog Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts