SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

49 Circuit Racing for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

14
Was $76,500$57,950
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
13
Roll Cage
Log Book
Delivered new by McLaren GT in December 2016. New engine installed in May 2018, has less than 1300 kms. New gearbox installed in January 2018, has less than 3,300 km. All MGT upgrades for the 650S GT3 included in this car. Maintenance, lifing records, mileage, other documentation and vehicle viewing all available upon request. Last raced Phillip Island in 2018 and has since been privately owned with minimal private track day usage. Vehicle maintained by McElrea Racing / MR Tuning. Come

Brisbane QLD, Australia
Share
Watch
5
Roll Cage
Log Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

Smeaton Grange NSW, Australia
Share
Watch
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Moorebank NSW, Australia
Share
Watch
16
Roll Cage
McLaren 570S GT4 track car, never raced. All maintenance logged & updated as required by factory guidelines. Fully maintained by Zagame Motorsport. McLaren suspension upgrades done by Zagame 7100kms Passenger Seat & Harness Air Conditioning (standard on McLaren GT4) Car Cover 2 x sets of additional spare wheels with new slick tyres Car is delivered on a rain tyre set. Wheel nut socket & air jack spike Spare brake rotors & pads Fully prepped ready to use on track

Adelaide SA, Australia
Share
Watch
12
Was $43,000$40,000
Roll Cage
Log Book
Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Rosebud VIC, Australia
Share
Watch
2
Roll Cage
Log Book
Ford Mustang 1964 Historic Touring Car Vintage Racing Services Engine RHS Heads Boss Block etc. Reliable and a winning NB Car $98,000.00

Warriewood NSW, Australia
Share
Watch
7
Roll Cage
Log Book
Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

Gosford NSW, Australia
Share
Watch
20
Replica Project Body is new, as are the wheels. Both exact reproductions of the original. The tub componentry, patterns and drawings are for a full monocoque structure as per original, not a tube frame. Front and rear hubs are for patterns. The drawings are all working drawings done professionally by various sources. Please ask any further questions for more information. Shipping around New Zealand can be easily arranged. International shipping can also be arranged, a quote can be pro

Christchurch, New Zealand
Share
Watch
10
Roll Cage
Log Book
Ford Mustang 69 Boss 302 Vintage/Historic/Classic Race car. This is a genuine 69 Boss 302. Raced for 19 years in New Zealand by current owner/seller. Raced in the USA 2010, and at Lakeside and QR, Australia 2013 and 15. Price includes Car, Spares and Enclosed Trailer, the complete set up. If interested contact for details.

Tauranga, New Zealand
Share
Watch
12
Roll Cage
Log Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Helensvale QLD, Australia
Share
Watch
9
Roll Cage
Log Book
Motorsport Australia Historic log booked group N Mach 1 Mustang Rotisserie restoration taken back to metal, retaining its original exterior paintwork, not a showpony but presents very well. All new mechanicals inc Dry sump Dart based 351 Windsor forged internals RHS heads built by Kanaris Engines 600+ HP, Haltech ECU, New TKX close ratio, 9” 3.89 Trutrack, 4 link rear end on fully adjustable coil overs all round. Motorsport hubs front on 2-peice hub and rotors, tubular upper and lower wishbones

Mansfield VIC, Australia
Share
Watch
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.

Launceston TAS, Australia
Share
Watch
6
Roll Cage
Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.

North Turramurra NSW, Australia
Share
Watch
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing

Marrickville NSW, Australia
Share
Watch
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

North Lakes QLD, Australia
Share
Watch
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S

Adelaide SA, Australia
Share
Watch
10
Roll Cage
Log Book
64 1/2 Ford Mustang historic touring car. Raced by Harry Bargwanna Well sorted and successful front running race car. Newly built 289 motor ( not raced ). Boss block, RHS heads, New Callies steel crank. Top loader gearbox. 9 inch diff with spool. Floated rear end. Spares. 12 wheels, top loader gearbox , 3.55 9 inch diff, distributor, starter motor, front calipers, front discs , front stub axles. Car located Engadine NSW.

Engadine NSW, Australia
Share
Watch
10 1
Registered
Log Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1

Menai NSW, Australia
Share
Watch
12
Hello, Here is an exceptional original Can-Am, John Cannon Commander Motor Homes. This was sold to our owner by John's son Michael, shown in one of our pictures! There is a copy on sale floating around, but "this" is the original. My client has owned and raced this McLaren for a number of years. The car was completely restored by Tony Nicholson. This car is one of only a handful of top tier restorations and is included in that group with the original of Denny and Bruce! Our client refers to this

Spokane, WA, USA
Share
Watch