72 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
19
Roll CageLog Book
Now available at Muscle Car Warehouse is one of the most iconic and most successful Chev Monza to grace Australian circuits was the wild-looking Bob Jane sports sedan. It was the last car Bob Jane raced in anger, before hanging up his helmet. The big-winged monster, built with a liberal dose of Aussie ingenuity, was also raced by fellow greats Peter Brock, Allan Grice, Dick Johnson, Bryan Thomson and Brad Jones. It all started way back in 1978 for Bob Jane and this Monza in the United States aft
3
Roll Cage
Brand new motor 30k fully recond gear box 7k both one meeting old car well maintained as new body comes with 2 spare sets of wheels 5 gear sets and 7 sets of springs plus sway bar
4
Roll Cage
Fully recon motor 18k fully severed gearbox 4.5k both 0km car well maintained body like new 2 spare sets of wheel 5 gear set 7 set of springs extra sway bar
6
Roll CageLog Book
1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi
3
Roll CageLog Book
Started life as an English import car and was purchased by Brian Hannaford in 1982 and raced as a category 5 car (have the origional log book). Currently a Group S car but only use at race meetings in Tasmania since 2008 with the current owner. Engine volume is 1131. 50.15 BHP at the rear wheels, built by Chris Milton in 1992. 1 meeting old competition clutch and Super Stubs to front suspention, all supplied by Colin Dodds. too many upgrades to list The motor has been freshened up and at the sam
13
Roll CageLog Book
This 650S GT3 was delivered new by McLaren GT in December 2016. New engine installed in May 2018, has less than 1300 kms. New gearbox installed in January 2018, has less than 3,300 km. All MGT upgrades for the 650S GT3 included in this car. Maintenance, lifing records, mileage, other documentation and vehicle viewing all available upon request. Last raced Phillip Island in 2018 and has since been privately owned with minimal private track day usage. Vehicle maintained by McElrea Racing
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
10
Roll CageLog Book
FOR SALE - 2014 Nissan 370Z Production Touring Car. This car has been built to Motorsport Australia Group 3E Production Touring regulations complete with Motorsport Australia approved roll cage, Motorsport Australia log book and a AASA log book. It has just over 5000kms on the odometer since new. Mechanical - This car has a powerful 3.7L V6 twin throttle body engine with twin pod air intakes, extractors and a full exhaust system which sounds amazing. It gets the power to the ground via a bra
8
Roll CageLog Book
MGF Race Car currently competing in the SA Motor Racing Series in the MG & Invited British class. Car has MG Trophy suspension (adjustable) Trophy brakes (larger calipers with slotted and dimpled rotors) PLUS 160hp engine and computer. Comes with 4 spare wheels with good race tyres and a spare rear bumper. A tandem axle small car trailer is also available to the purchaser for $2,000.
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
20
Replica Project Body is new, as are the wheels. Both exact reproductions of the original. The tub componentry, patterns and drawings are for a full monocoque structure as per original, not a tube frame. Front and rear hubs are for patterns. The drawings are all working drawings done professionally by various sources. Please ask any further questions for more information. Shipping around New Zealand can be easily arranged. International shipping can also be arranged, a quote can be pro
9
Roll CageLog Book
MGB Group Sb top spec engine Quaife diff straight cut gearbox with overdrive Fully serviced ready to go nothing to spend , current seatbelt. $22.500 Message Stan for full specs 0416128867 .