25 Sedan Race Cars for sale

1998 Evolution 5 Track / Tarmac Rally Car. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by Melbourne Performance Centre Modifications / extras: Mechanical: Kelford 272 Cams Kiggly Racing HLA oil pressure reg Walbro fuel pump Evo 7 RS rear diff Evo 9 Clutch with Exedy MC14 Competition plate Ralliart rear bushes HKS

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped and painted nardo grey including boot AP Rac

11/2020 BMW M2 F87 LCI Competition Coupe. Repairable write off. Perfect track day, new race car build, or can be re-registered, Travelled 31280klm, 3.0L inline twin turbo inline 6 engine 302kW 550Nm, 6 speed manual gearbox, Rear Wheel Drive with M-Limited Slip Differential. Features 19 Inch Alloys, Quad Sports Exhaust, 12 Speaker Stereo System, Apple Car Play, Handsfree Calling with Voice Control, Heated Seats, Keyless Entry with Push Button Start, M Performance Pre-sets, Adaptive Steering, Digi

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

1999 MGF race car. Fully road registered genuine low mileage race car, with LE500 front lights and bumper, TF suspension, TF brakes, near new seat, in-date harness and new battery. Currently log booked and sold with road wheels and tyres, but full set of race wheels (tyres need replacing) available by negotiation. Excellent entry point into MG Racing, which launches in S.A. in March.

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request. .

Group 3E Production touring car....2023 Australian Production Car Championship A1 Class winning car. Just completed 4 from 4 wins at recent Bathurst International. Engine 1 meeting old...comes with comprehensive spares package including panels , long engine , and gearbox. 12 wheels and tyres, new unused AP Rotors, pad sets, springs suspension and driveline parts. Car was completely customed wired at beginning of 2023 season along with new Motec PDM's and Dash at a cost of $40K. New 6 spot AP Ra

Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun

2016 BMW M3 build by and purchased from Bruce Lynton Service team prior to 2022 Bathurst 6hour which was this cars first race and placed 4th in class. It has also won the 2022 Australian Production Car Championship. The car has been built and serviced with no expense spared and constantly developed to be a very competitive and reliable package as proven by its race results. Car Qualified on the front row for 2023 Bathurst 6hr and finished P2 only 2.7 seconds behind the winner. Car is fully pre

I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a

FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt

Nissan R33 V spec GTR Was built from a STD Car Ground up , It has been built and revised over the years for WTAC but could be easily raced in Sports sedans with minimal mods Only the Best of the best parts have been used Engine Bullet Billet 3L Block Built by MOSTECH in qld and only done one WTAC 2022 since build 3.2 Stroker Supertech Dual Springs with Titanium Retainers OS Giken Cam Gears Avaid Dry sump pump with ross Billet 2WD Pan Peterson 3 Gallon Oil Tank Cam and crank Trigger