89 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
10
Registered
Mazda MX5 2009 NC2. Great daily driver and weekend track car. Extensive modifications as follows: FD RX7 wheels & Bridgestone RE003 tyres - Yellow dot sway bars - Yellow speed endinks - Silvers coil overs - Racing Beat headers - GWR mid-pipe - Ecutek tune with autoblip, launch control etc - Autoexe cold air intake - 4.1 lsd - T3 rotors with braided lines and carbon tech pads - Guardians design steering wheel - Fire extinguisher - Stubby antenna - Kenwood headunit with Apple CarPlay - RX8
3 1
Roll CageLog Book
Improved Production RX3. 13B O'Dell Fontana bridge port. Laird manifold. Motec. Aim dash with full logging. 5 speed dog box. Hilux rear end, floating axles, cambered. MCA 3 way adjustable gold shocks. Spare set of wheels, flares, spoilers and moulds. Wilwood brakes.
19
Registered
This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,
13
RegisteredRoll Cage
Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut
20
2013 Renault Megane RS265 6 Speed 2lt Turbo Brilliant drivers car - Ran faultlessly in every stage of Adelaide Rally All maintenance up to date, including timing belt, clutch and brakes having very recently been taken care of. Non Caged - has been returned to stock trim except steering wheel and shifter (Have Velo GP1 Drivers Seat if needed) Full 3" exhaust ITG Intake SMF Clutch conversion Eibach springs Enkei 18" wheels with AR1 tyres DBA rotors with Intima SR pads RS tuned Velo aftermark
14
Registered
Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage
11
RegisteredRoll Cage
For sale is my 2004 Clio RS172 MK2- with ESP for $6500 or without the $5500 negotiable I have decided to sell my little pocket rocket as it is not getting use as much anymore. Great handling and fun car to drive. It was my daily for about a year and I took it to Sandown once for a track day. My intention was convert it in a track car but ended up getting a dedicated track car so here it is for sale now with a great package for someone looking for a track ready car. Currently sitting at 188356
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
10
Roll CageLog Book
MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR VN COMMODORE RADIATOR KEEPS THE CAR COOL - PLUS EASY TO GET. NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF
15 1
RegisteredRoll Cage
Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford
31
Roll CageLog Book
This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manuals Two Race Tech seats (great for t
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
10
Roll CageLog Book
Renault Meganne RS 250 Production race car built to Motorsport Australia Meganne 265 Trophy R Group 3E Recognition Documents. Low milage and set up for racing. Engine tunned by B-Tunned for maximum power whilst keeping within Regulation's turbo boost limit (2.55 bar) New Nitron 3 way adjustable suspension from England with camber and caster adjustment with Kings springs duals at the rear. White lighting adjustable sway bars front and rear with new Super Pro bushed through out. Car is fully wheel
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.