84 items with Roll Cage for sale

IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new

Up for sale is my Vy commodore track car The engine is a 6.2 LS with a standard crank H beam rods and forged pistons It’s got a mild cam with upgraded pushrods, LS7 lifters, double valve springs with locks and retainers to suit, crow cams trunion bush upgrade into factory rockers mellings oil pump with double row timing chain custom modified VY sump to hold more oil with improved racing products baffle inside, it’s got a 102mm throttle body and over the radiator intake, custom catch can with 2 -

Brisbane Sumner 4074 inspections welcome Monday to Triday 9am to 4:30 pm Great BMW E36 with 2.5 litre 6 cylinder. 5 speed manual with heavy duty clutch. 2019 new 6 point front an rear quality roll cage, race seat and harness. Coil over suspension. Air conditioning still connected. Intercom with roof aerial. Good tyres and superb brakes. Ready to go on your next adventure or track day. Was purchased in 2019 in great condition, original paint, and with a perfect white leather interior and used

Peter Brock’s VN Commodore raced at Bathurst 1991. Has a log book and it’s in excellent condition. Chassis PE013 built by Larry Perkins. It ran between 1991 to 1999.

Selling Complete Running Racecar (Front Running Racecar in its category) The car has the following: - Ex V8 Commodore Cup - 6.0L L98 Carburated - T56 6 Speed Gearbox - Haltech VMS ECU - AIM Data Logger Dash - AP Racing Brakes (6 pott fronts and 4 pott rears) - Willwood Pedal Box (under dash) - 500RHP - Has won the Super TT over 2L Treaded Championship 2022 - 850cfm Brawler Carby - V8 Supercar front bar - GTSR Rear Spoiler - 1-7/8 Primary's to 4 into1 3inch collector - Cams approved roll ca

BMW M135i " Bathurst 6HR ready" "APC ready" Group 3E production complete with full MA Group 3E recognition papers Low milage New 6 Speed manual gearbox Logbook Full FIA Roll Cage New Turbo & Boost modules New Diff cooler & pump Motec Dash with upgraded data fields Fuel surge Tank with dual pumps and flex All fuel lines are fully braided with alloy race fittings. New Dual fuel pumps working in sync to allow full pressure and fail over. Dry Brake and Fuel cell (recertified for 5 years

Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small

*********** MUST SELL ASAP MAKE AN OFFER *********** Meticulously and professionally built specific for Targa and ATR, this car came 3rd in the 2022 ATR Championship EM RWD category. Due to some very recent health issues I need to simplify and move this on. It can be very easily set to run circuit. The car is quick and handles amazingly! Open to offers. Upgrades are are huge but include: - National Spec AGI Cage - DCT Box - VRSF Catless Down/Charge - M3 Front end - ADVAN suspension tune and se

One of 2 x A9X’S used by Bob Morris to win the 1979 Australian Touring Car Championship (ATCC). Raced Bathurst 1000: 1977 and 1978. ATCC outright wins in 1978 and 1979. 3 owners from new, original cams logbook. Raced in period by multiple Le Mans 24Hr, Daytona 24hr, Spa 24Hr, Bathurst 1000, Indy 500 winners: DEREK BELL, DIETER QUESTER, JONNY RUTHERFORD, JANET GUTHRIE & of course; BOB MORRIS. Original, unrestored and magnificent. More pictures and information at: https://www.ecuriebowden.c

BMW e46 m3 Sports sedan, as raced in the national sports sedan championship finishing 3rd in the last 3 championship seasons. -Aerodynamically enhanced carbon fiber body work -SB2.2 nascar engine, individual throttle bodies, drive by wire -Paddle shifted holinger rd6s -Motec m150gprp with upgraded logging, c187 data logger, motec pdm, all the allowable creature comforts such as traction control. -Double wish bone front end with billet uprights, live axle 3 link rear with camber adjustment, Ohl

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.

FOR THE FIRST TIME IN OVER 15 YEARS, WE ARE PROUD TO PRESENT PERKINS ENGINEERING HOLDEN COMMODORE V8 SUPERCAR PE036! 1999 PE036 Castrol/Perkins Engineering V8 Supercar “Silver Bullet” driven by the Enforcer Russell Ingall. Bodied as the road going VT commodore, this amazing machine was the forefront of the V8 touring car series in the year 2000. Larry Perkins with his Castrol sponsored holden Commodores always proved to be a crowd favourite. PE036 debut to the V8 touring car series was proving

Your chance to grab one of the most refined floor pan race cars going around. One of the two infamous Racetech performance Bathurst headline vehicles. Owner is building a space frame car this year and hopes to find a great home for this epic machine. This car has everything you need to enjoy a club day, win state titles or compete at a national level. You could strap some aero on and give WTAC a go. The options are vast. It has(and then some): -Racetech performance Bullet billet RB. All the b

Historic Gemini Coupe Sports Sedan. Originally built by John Brookfield for Peter Brock, circa 1977. Previous owners include Rowan Harman, Robin Doherty, Darren Hossack, Grant Munday, Stephen Craig. ENGINE:- 13B Extend Port FD Series 6, Ceramic Apex Seals, Balanced and matched rotors, custom exhaust manifold, modified inlet manifold, Full Throtle Engineering crank sensor, Bosch Motorsport 2000cc injectors, OS Giken triple plate clutch, Borg Warner 91/74 alloy core turbo, 1.45 twin scroll exhaus

Built in-house by our team at Lynton Motorsport (Bruce Lynton Service). Sister car to the 2019 and 2021 Bathurst 6 Hour winning cars and 2022 APC Championship winning car. Car has won races and had round wins in both QPC/APC. Car is built using top brand parts; • PWR Coolers: Radiator, oil cooler, transmission cooler, diff cooler, side cooler • Drexler LSD Diff • Team Dynamic wheels (4 sets), • ATL 100L Fuel Tank with dry break • Vbox 2 Camera system • Motec dash • BM3 Tune • AP Front and Rear

Own a piece of history and one the best looking drag cars, the ex- Alf Sorbello's Wild Bunch BMW 850i which ran in AA/AP. The body shell was hand made from new individual light weight body panels that Soebello purchased from BMW motorsport. The chassis was built as chrome molly twin rail tube frame with fully adjustable 4-link suspension, legal for Top Doorslammer and the IHRA Pro Mod class. This package comes with all components to build a top level drag racing car. Good for multiple ANDRA c

BMW E36 shell over a tube frame chassis. Full tube frame car and is yet to have it's final tech inspection. The chassis can be teched to go as low as 6.0secs with the addition of 3 more bars - 2 small ones behind the driver and one in the side intrusion area (was informed by the andra inspector when it was last viewed). It is currently set up for a 3.8l ecotec and guide, 9in diff in the rear, strange front suspension and brakes, koni rear, sheet metal diff housing, full floater, 15x15 rear we

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P