17 items for sale

Mitsubishi Mirage Asti gravel rally car. Built and logbooked for the beginning of the 2011 season, this car has competed in West Australian State and Clubman Championship rallies, and Targa/Tarmac Rallysprints scoring podium results and class wins. - Freshly rebuilt 1600cc 4G92 MIVEC - Standard gearbox with a KAAZ limited slip differential and Albins 5.1:1 final drive - MCA Gold competition suspension built specifically for this car with ralliart bushings throughout and Hardrace adjustable re

For sale evo 8 race car Built for targa - 6 point bold in agi cage (national level) - new Omp seat and 6 point harness - spare parts and accessories - new set of wheel and street tyres. (not pictured) - 2 new semi slick race tyres - new paint 4 years ago - Fire extinguishers (x2) - Rear mounted battery - MCA Purple Suspension, fully adjustable - Front RS strut tower brace -Brembo Brake Callipers -Braided Brake Lines -Walbro 225 Fuel Pump -Fuel Injectors serviced and flow tested -Kelford 272 C

IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu

1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport

Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

Brand new Mirage Proto/G4 body set up for Evo X, has R5 style steering column, Lexan window kit, R4 strut towers for longer travel, carbon door cards and roof vent. Fully painted and ready for assembly. Import duties and import certificate are paid and completed.

Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro

Sports sedan. Have to sell so I can finish other projects. Recently raced in NSW Hillclimb round on fresh set of A7 Hoosiers. This car has racing history and logbook dating back to 25/3/1982. 265 Hemi 6 mid-mounted. Genuine Hopwood wheels. Fully floating brakes, 10 bolt rear end and Ford single rail gearbox. Plenty of history in this car, and we can put you in contact with its original builder. Motor, genuine 48mm Webers, fuel system, and brakes have recently been re-done, and all electrics from

Nissan R33 V spec GTR Was built from a STD Car Ground up , It has been built and revised over the years for WTAC but could be easily raced in Sports sedans with minimal mods Only the Best of the best parts have been used Engine Bullet Billet 3L Block Built by MOSTECH in qld and only done one WTAC 2022 since build 3.2 Stroker Supertech Dual Springs with Titanium Retainers OS Giken Cam Gears Avaid Dry sump pump with ross Billet 2WD Pan Peterson 3 Gallon Oil Tank Cam and crank Trigger

Porsche GT3 996 2003 Cup Car. Excellent condition. Fully maintained. New engine, gear box, diff, rotors front and rear. Comes with 3 sets of rims - 2 sets of slicks, one set of wets. New seatbelts. Motec C125 dash. Car has full history of receipts. Car has been worked on by Michael Newton. Car comes with radio communications system and many Other spare parts. New windscreen.

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers