66 Car, Bike or Kart with Roll Cage for sale

VERY regretful sale - only selling due to change of circumstances - open to discuss reasonable offers. Give me a call, we can chat much further about the car but here is the (long) summary: 1997 Mitsubishi Lancer EVOLUTION IV GSR ~148,000~km Grey import 2009 - Rally Rego clause - currently on Special Interest Type B registration in Tasmania. Car was built in 2009/2010 by Techsport Melbourne for Adam Newton to race in Targa Tasmania - where it won Rookie Rallye 2010 showing off its Unique Cars

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , has raced with good results in both ,dry sumped 2.2 litre, fresh engine , Modena 5 speed dog box just freshened , 6 pot and 4 pot APcalipers , supercar rotors , 3 way adjustable shocks , new turbo and exhaust , most of the running gear is one meeting old , just had a heap of work and a tune at Ravage, Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple s

Mitsubishi Mirage Asti gravel rally car. Built and logbooked for the beginning of the 2011 season, this car has competed in West Australian State and Clubman Championship rallies, and Targa/Tarmac Rallysprints scoring podium results and class wins. - Freshly rebuilt 1600cc 4G92 MIVEC - Standard gearbox with a KAAZ limited slip differential and Albins 5.1:1 final drive - MCA Gold competition suspension built specifically for this car with ralliart bushings throughout and Hardrace adjustable re

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

1998 Evolution 5 Track / Tarmac Rally Car. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by Melbourne Performance Centre Modifications / extras: Mechanical: Kelford 272 Cams Kiggly Racing HLA oil pressure reg Walbro fuel pump Evo 7 RS rear diff Evo 9 Clutch with Exedy MC14 Competition plate Ralliart rear bushes HKS

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped and painted nardo grey including boot AP Rac

EVO 9 LHD Genuine full Voltex Aero kit with light weight panels and Lexen Fresh 2.2L Including New 2.2 Crank New I Beam Rods New CP Forged Pistons New Modified Oil pump Assembly New Timing Belt and kit New Water Pump AMS manifold AMS intercooler Freshly rebuilt Garret EC1 Turbo Nitto 1.3mm Stopper Head Gasket Kelford 272R CAMS OEM VRS Gaskets Engine Oil TOTAL 10/60 Racing New OEM Evo 6 Koyo Radiator New OEM Idle Air Control Motor 2000cc injectors 2 x Bosch high volume fuel pumps New Ra

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

For sale evo 8 race car Built for targa - 6 point bold in agi cage (national level) - new Omp seat and 6 point harness - spare parts and accessories - new set of wheel and street tyres. (not pictured) - 2 new semi slick race tyres - new paint 4 years ago - Fire extinguishers (x2) - Rear mounted battery - MCA Purple Suspension, fully adjustable - Front RS strut tower brace -Brembo Brake Callipers -Braided Brake Lines -Walbro 225 Fuel Pump -Fuel Injectors serviced and flow tested -Kelford 272 C

Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec 800 ECU and C125 Das

PRICE DROPPED !! Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors

Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom

IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig