63 items in Australia with Roll Cage for sale

Mitsubishi Mirage Asti gravel rally car. Built and logbooked for the beginning of the 2011 season, this car has competed in West Australian State and Clubman Championship rallies, and Targa/Tarmac Rallysprints scoring podium results and class wins. - Freshly rebuilt 1600cc 4G92 MIVEC - Standard gearbox with a KAAZ limited slip differential and Albins 5.1:1 final drive - MCA Gold competition suspension built specifically for this car with ralliart bushings throughout and Hardrace adjustable re

If you think the Subaru WRX 22B is rare at 424 units globally then the car you are looking at would have to be the holy grail of Japanese classics. Only 30 cars were manufactured by Ralliart UK of which 20 were painted Scotia White and a mere 10 finished in Satellite Silver. And this particular Satellite Silver RSX – first registered in the UK and imported into Australia in December 2000 - is believed to be the only one in the country. To say this is an exceptionally rare car would be an und

Toyota 86 K-Swap After many years of research and development, its time to move on to something new. Anyone who has developed a car knows how much work and rework it takes to develop something and this car is no exception. Key information below. Engine - K24A4 closed deck and fire ringed (fresh build < 25 hours). - Forged build (Skunk rods and wiseco pistons) - standard crack - race bearings. - Garrett G25-660 with water cooled wastegate. - K-power swap kit (engine mounts, intake manif

This is without doubt the best example of a 997.2 Cup Car available. This car has had very little use since winning Class A at the Phillip Island Magic event in 2018. Engine has just had a full rebuild by Flat Six with new EVERYTHING and has completed one test day only. New clutch and basket just installed. New brake discs just installed, new GKN Race Shafts just installed. New battery just installed. New exhaust, shocks, K frame ( Due to wear ), wheels all fully maintained, car just fully rep

1998 Evolution 5 Track / Tarmac Rally Car. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by Melbourne Performance Centre Modifications / extras: Mechanical: Kelford 272 Cams Kiggly Racing HLA oil pressure reg Walbro fuel pump Evo 7 RS rear diff Evo 9 Clutch with Exedy MC14 Competition plate Ralliart rear bushes HKS

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped and painted nardo grey including boot AP Rac

EVO 9 LHD Genuine full Voltex Aero kit with light weight panels and Lexen Fresh 2.2L Including New 2.2 Crank New I Beam Rods New CP Forged Pistons New Modified Oil pump Assembly New Timing Belt and kit New Water Pump AMS manifold AMS intercooler Freshly rebuilt Garret EC1 Turbo Nitto 1.3mm Stopper Head Gasket Kelford 272R CAMS OEM VRS Gaskets Engine Oil TOTAL 10/60 Racing New OEM Evo 6 Koyo Radiator New OEM Idle Air Control Motor 2000cc injectors 2 x Bosch high volume fuel pumps New Ra

The vehicle has been used for Regularity events at Mallala Circuit and is fitted with the following; 3 SGE NA engine with mild cam, Advanced headers with ceramic coating, stainless steel exhaust and twin mufflers. Power - 125Kw at the rear wheels. Oil catch can, pod air filter, engine oil cooler fitted with braided lines. Penrite fully synthetic racing oil used. LINK ECU G4 TST205, Custom fascia with LINK MXS Strada 5" digital dash monitoring fuel pressure and temperature, oil pressure and tempe

This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua

PRICE DROPPED !! Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors

Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom

Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount

ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje