34 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
35
Registered
Restorers dream! This 1969 Ford Mustang Shelby GT500 is fresh out of a barn and ripe for restoration to put back to its former glory. Having originally left the factory in Pastel Grey as you can see the car has been repainted in red at some stage of its life. Current owner of 25 years plus. The interior is mostly original and untouched but has had an aftermarket stereo fitted. Lurking under the hood is the mammoth 428 Cobra Jet big block engine with matching number and is backed by a four speed
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt
15
RegisteredRoll CageLog Book
Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.
15
Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185
72
Registered
The Ford XW Falcon GTHO Phase II is arguably the toughest of all the GTHO models Ford made. With all of the 267 examples produced having “solid” 351 4V Cleveland engines, 31 spline Top Loader gearboxes and differentials. Falcon GT enthusiasts would argue that the Phase II is their favourite. This example, restored approximately 15 years ago in its original colour of Diamond White with saddle interior. It was originally delivered to Duhig Ford in Essendon, Victoria and was built in August of 1970
10
Will be rolling for transport More pictures upon request View Torquay VIC Shipping nationwide can be arranged Thanks
5
Roll CageLog Book
John Mcintyres NZ championship winning car has brand new engine with stroker kit which was built by a very reputable engine builder has a rebuilt gearbox.... has been a very cool car to drive but now someone else's turn... car comes ready to race with heaps of spares.... engine has very close to 600hp.... bring a trailer for the car and another for the spares.
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
18
This is the 3rd car built by Jack Pryor and Clive Adams and was apparently modelled of the Stan Coffey Cooper Bristol that Clive had driven on occasion. It as completely restored for me by Paul Trevethan in Melbourne and debuted at Winton in 2007 and has been running at the pointy end of Group Lb fields ever since. This Prad runs a fully worked 6 cylinder grey Holden motor fitted with a very rare Phil Irving Repco High Power cross flow head, which is mated to a 4speed Borgward transaxle. No expe
20
1989 2wd Sierra Sapphire Cosworth Delivered in September 1989 at TCH Sheffield Purchased by owner no.2 in 1993 from Specialist Cars in Micheldever who kept it in the UK before shipping it to Australia in 1999. It was then sold to owner no.3 in 2009 then sold to owner no.4 a few years later. I purchased the car in March 2017. The car has a folder full of history going back to the early 1990’s with a history report from TCH dating from November 1989. 73,000 miles Fully rebuilt engine. All compo
7
RegisteredLog Book
1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi
17
Roll Cage
Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed
4
Roll CageLog Book
ESCORT Group 4 ex works Ford Australia car - INB 115 plate registered ex Colin Bond/Bob Riley/Greg Carr/Dick Johnson/Ian Hill/John Berne, one of 4 works detached cars built for the Australian Rally championship during 1976 - 1979 under contract to Colin Bond (Ford Australia) , also driven in select events ie Southern Cross International Rally , Alpine and Castrol International rallies. This car is original body shell and only one of two original cars remaining in existence. Safety equipment, eng
10
Roll CageLog Book
Cams log booked ford fiesta 2006 ford fiesta 1.6lt Omex 600 ECU Jenvey throttle bodies Short ratio IB5 gear box with LSD TVV Racing flywheel TVV 3 piece ceramic clutch with lighten race, pressure plate DGR coil overs Newman race cams Wossner pistons Pec rods ARP studs Cobra seat Saas steering wheel Short shifter Engine does need Attention but is still running.
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
9
5.4 lt rare manual V8, 5th anniversary (only two for sale on car sales) most of the work has been completed. the car needs the interior finishing, we have no time due to work and other commitments. mostly motorsport, have all receipts for the parts and the repairs completed. will need to go for a wovi inspection once finished. original right rear quarter damage (see photo) has been repaired by a local panel shop, if you have the time to finish it. this is a great car and drives great.