31 items with Roll Cage for sale

Great BMW E36 with 2.5 litre 6 cylinder. No engine modifications including exhaust system. 5 speed manual with heavy duty clutch. 2019 new 6 point front an rear quality roll cage, race seat and harness. Coil over suspension. Air conditioning still connected. Intercom with roof aerial. Good tyres and superb brakes. Ready to go on your next adventure or track day. Body and paint work still all original, no accidents. Can be road registered as a single seater in it's current set up with a mod

E36 328i manual coupe for sale, successfully super sprinted throughout 2022 and 2023 with BMWCCV and MSCA. Fantastic car. Progressively improved with a mostly stripped out interior, upgraded wheels, tyres and brakes, race seat, harness and 6 point roll cage. Unfortunately, I don’t have time to keep racing, so after 2024 off the track I’m putting it up for sale. $15,000 as listed. Call to discuss or arrange an inspection. Details below: 1995 BMW E36 328i Coupe ⁃ M52 2.8 litre engine ⁃ 5 speed

1040kg. @555rwhp at 18 psi This is your opportunity to buy a very well sorted Unique Time Attack package. -Recent refresh all brake calipers, brake master, new clutch slave and clutch master. -New windscreen. -All Carbon body repaired and coated in 2 pack clear. -Roof and rear bar new Matt black Avery wrap. -Microtech LT16 modified for flat shifting. -Motec CDL3 data logging dash -Lots of sensors -Oil pressure/temp -Fuel pressure -Water temp -Air intake -Afr -Seperate egts microte

BMW M135i " Bathurst 6HR ready" "APC ready" Group 3E production complete with full MA Group 3E recognition papers Low milage New 6 Speed manual gearbox Logbook Full FIA Roll Cage New Turbo & Boost modules New Diff cooler & pump Motec Dash with upgraded data fields Fuel surge Tank with dual pumps and flex All fuel lines are fully braided with alloy race fittings. New Dual fuel pumps working in sync to allow full pressure and fail over. Dry Brake and Fuel cell (recertified for 5 years

In order to continue growing in the Motorsport realm, we unfortunately have to let go of some of our fleet at Pereira Motorsport! Up for sale is my 1996 BMW e36 323i Touring car replica. This car has had a lot of R&D put into it, and if you’re in Queensland or follow my page, you will be familiar with the car! It has entered several rounds of the Queensland Touring Car Championship as well as placing a strong 2nd in the 2022 Replica Tourers Championship season! The car has also been used in ma

For Sale is my well prepared BMW E30 323i. It is fully log booked and has the 2.5L motor from a 325i and is fully built and compliant to the BMW E30 racing specifications and can also run in 3J improved production. The car is a consistent front running car having achieved race podiums and 3rd place at Victorian State Circuit Racing Championship round 3. The car has had various upgrades throughout 2023 and has been well looked after. Other details and specifications include: -Bilstein double ad

Countless hours spent building this car as it was my childhood dream of having an E36 like this with a straight 6 M50. I was planning to get it turbocharged (iron block handles safely 350-400hp without internal mods), plenty similar builts done like this at “M50 Turbo Builts” Facebook Group, but life throws some curve balls and sadly I need to sell it. Plenty of photos and videos on my Instagram www.instagram.com/racingrenan BMW 325 Track car prepared by Lyus Racing in WA. Happy to assist with

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

Ready to Race, Australian GT3 Trophy Series Champion in 2019. This is an awesome car to drive and is still very competitive with lap times at QR 1.09 The engine has just been completely rebuilt with run in hours only, Motec ECU, Dash and Logger have been fitted so you can tune for your needs. Come with 4 sets of spare wheels and other spares, all other spares and information are available from Reiter Engineering. This car presents in very good condition and has been looked after by professional

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request. .

$28,500 negotiable, contact me to discuss. This car has been campaigned and developed in the Queensland Touring Car Championship over the last couple of years, it has placed second in category B and is a rapid, reliable and well developed car. It has lap times posted of 58.9s at Lakeside, 86.1s at Morgan Park and 84.1 at Queensland Raceway. These times were set on budget Zeknova slicks and we think there is a bit more time in it. Ideal for someone looking to race this year in QTCC, Replica