46 items for sale

When Subaru released the “Hawkeye” WRX in 2006, it was met with universal acclaim from motoring journalists worldwide for its sharp performance and outstanding levels of grip. Even more impressive were the reviews of Subaru Tecnica International’s model variant, with its stronger drivetrain and higher-output engine. If you are serious about your motorsport, it is the STI that you want to own rather than the base model WRX. And that is exactly what the current owner wanted when he acquired this

HIGH SPEC GRAVEL RALLY CAR, NEW MAXIMUM 207 SHORT MOTOR, RECON HEADS, ASSEMBLED & TUNED BY RACE TORQUE, WITH NEW VF53 TWIN SCROLL TURBO, MOTEC ECU, ALL UNDER 200KM. MCA GOLD REMOAT CANISTER SUSPENSION. GROUP N AP FRONT & REAR ROTORS & CALIPERS, TWIN MASTER CYLINDER BIAS BRAKE SYSTEM,HYDRAULIC HAND BRAKE. MAPPED CENTOR DIFF CONTROLLER, FRONT & REAR CUSCO DIFFS, 6 SPEED WITH NEW HD ORGANIC CLUTCH, ALL 180 STI, NEW DRIVE SHAFTS. TWIN FUEL PUMP SET UP WITH SURGE TANK. 8 POINT WELD IN ROLL CAGE. WING

WRX STI 2002 rare black with blue pearl very low 125,000 ks Owned for 4 years by 60-year-old mature driver just had a 20K engine fitted at C&G Subaru dealer this included New factory STI semi forged short motor New factory STI heads Full OME gasket and seal set New VF34 turbo New S/S up pipe heat wrapped new water pump and thermostat New timing belt kit New A/C condenser and Regas New K&N filter Al belts, hoses and clamp replaced as needed Put together by Peter head Subaru mechanic with many yea

2014 wrx manual rolling shell , no need to wait to have a cage built this is ready to build into a race car Has just had a national level tig welded roll cage fitted to the highest standard Includes fabricated alloy/ boot rear seat delete (18k in cage and fab) Custom seat base and momo race seat Full wiring harness , dash . All suspension factory and rear diff / drive shafts. Vehicle and was originally a write off , front damage lh end of the rail, has been checked out on jig and is stra

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

This LIKE BRAND NEW Subaru Impreza WRX STi Type R with 113,000kms on the clock is a popular rally-bred performance car. It is powered by an ‘EJ20’ 2.0-litre turbocharged flat-four, which is sent to all four wheels via a close-ratio five-speed gearbox Driver Controlled Centre Differential, and a mechanical rear limited-slip differential. Japanese import 2021 that has been put into storage in Australia since arriving . Tein fully adjustable suspension and HKS cat back exhaust are the only modifi

Subaru WRX Race Car - Race/Track/Tarmac rally - MY04 Java Black Pearl Very well maintained car with CAMS Log book. Run and cared for by myself and my teenage son, mainly at MSCA sprint events over the last 4 years, with regular servicing and improvements made along the way. Has been a fun track car for us, but time to move on and look at other motorsport options. Engine - EJ20 re-built with STI heads + Cams - Race pistons + rods, and bearings (by STI Docklands) - Custom built ATP High Flowed V

This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)

2022 Subaru BRZ. Why spend $50K on a bashed up old T86/BRZ. LOG BOOKED 3E SERIES PRODUCTION CLASS Shake down at last year's Challenge Bathurst. Only 5000kms on the clock. 800kms since build complete. Build includes: - New Brown Davis Roll cage - New Racetech Seat - New RPM 6pt Race Harness - New Sparco wheel and Quick Release Hub - New 6 Port Isolator fitted - New Radium dual catch cans fitted - New MCA Red Coilovers fitted - New 4 Pot AP Racing 5000R calipers at the front and 2 Pot APs at th

Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L

Improved production 3J 6cyl, Falcon Motorsport Australia log booked. Can be run in APRA, Production Cars, Improved Production Etc. Has run in Vic state series last 2 years, doing 2:02 at the island and 1:31 at Sandown. Will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and wheels with tyers. (does not include camera setup) Fully sorted car. Selling because I am upgrading. Located Russells Bridge Vic 3331

This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th

Ford Falcon Supercar - refitted as a BF. Currently running in Sports Sedans as 3D Roush Yates Ford Nascar D3 358 engine making 825 HP with low hrs since re-build Motec M150 ECU Motec C125 Dash Motec PDM Holinger RD6 with Holinger paddle shift Tilton Clutch Tilton pedal box AP COTF 18in brake package Ohlins TTX dampers built by AD Racing Shocks Morrison 8 throttle body intake manifold with dirve by wire Dailey engineering dry sump Fire bomb Car is in great condition A fast car ( top 10 finish in

1970 XW - 750hp 434 Dart/Eagle/CHI 3V +Port Nos (1000hp) (100k build) Turbo 400, 9in True trak Does a 9.25 quarter (with 150hp shot nos - will do high 8’s with 250 shot) won drag challenge twice, been featured in Street Machine Twice. Gazzard suspension. 250k spent on the build. https://www.streetmachine.com.au/features/1970-ford-xw-falcon-streeter-runs-nine-seconds https://www.streetmachine.com.au/events/drag-challenge/9-second-740rwhp-434ci-xw-falcon Also selling - Race Car Transporter -

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Swaps Considered This AMG A45 Edition 1 has been meticulously upgraded making it an ideal choice for enthusiasts looking for a track-focused or spirited driving experience. The car comes with the following modifications: - KW Clubsport 2-way Suspension - Whiteline Rear Adjustable Swaybar & Links - Hardrace Rear Adjustable Camber Arms - Project MU Club Racer Brake Pads - Girodisc 2 Piece Front Brake Rotors - DBA Slotted Rear Brake Rotors - Braided Brake Hoses - Genuine Mercedes Works Fro

2023 built Ford Fiesta Rally 2, car has only competed in four rallies. has 857 competitive Km's on the car. Never crashed and in excellent condition. Import duties are paid. Spare part package available at extra cost.