72 items for sale

1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit

2005 WRX STI was a genuine STI. Has complete hand made fibreglass and carbon fibre clip on front end. Runs a link GT4 ecu, tein suspension, rear wing, bigger turbo, front mounted intercooler, brembo brakes, brake ducts, running 295 nankang AR1 only a few laps old. Have run up to 315 tyres as well. Lightened flywheel with heavy duty clutch and also just fitted new bushes and linkages to gearbox so shifter is very smooth and small throw. Runs standard fuel tank with a surge tank in boot and 2 fuel

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Ready to pick up in September after a fresh rebuilt box! Highlights include

- MY05 STi Shell - ABW Motorsport wide body kit and doors, Plexiglass Windows, dry carbon roof
- Full weld-in roll cage - OMP Seat with head restraint
- Lifeline fire extinguisher with Novec Pressure System
 - 800HP/900NM PerFOURmance 2.5l with custom heads and fire lock head gasket and dry sump
 - Titanium custom 3.5-inch exhaust - PWR custom intercooler, radiator, and oil cooling package designed for circuit racing


Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L

2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts