44 items for sale

400HP atw GC8 WRX - July 2000 Freshly detailed and polished. Car has just been finished. Has fresh front wheel bearings and will replace rear ones before sold. Mechanic owner. Engine EJ207 99-00 Heads Kelford 272 cams Billet cam seals Fuji Racing Billet breathers Springs, retainers and 1mm over sized valves ARP head studs GTPS02-712 Turbo External GFB gate and GIR up pipe Gate blended back into the dump pipe Nuke catch can ID1050x Injectors Top feed rails GFB FPR -8 Fuel lines and fitting

Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.

**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s

Subaru WRX GC8 1999 model car has been set up for track days EJ20 5 speed timing belt water pump kit done (haltec computer) VF34 STI turbo AGI six point roll cage with harnesses STI version 2 front seats STI wheels new 17x7 +48 Nankang AR1 tyres 215x40x17 brand new (not the ones in photos) GD alloy front lower control arms STI top Mount intercooler STI strut brace Coil overs Car is ready to go nothing to spend Car is registered 12 months rego

2003 Lotus Elise 111S Amazing car to own and drive. While it has been in my car it has brought nothing but happiness but unfortunately all good things must come to an end. Equipped with: Sparco quick release steering wheel Team Dynamic wheels Custom Valved BC suspension RPM harnesses Single light conversion Carbon mirrors on aluminium stalks Custom har roof (removable) Exige side pods Black fuel cap Alloy side diffusers Non cracked instrument shroud Eliseparts headers Log booked C

Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,

Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!

NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s

Up for sale is my 13b turbo bridgeport rx7 that is track or race ready. Spent over 140k currently running on e85 with the wolgborner efi turbo has a full weld in cage. Endless brakes

MY06 Sti (Terry) 293kw @ 24psi High boost E85 274kw @ 20psi Low boost E85 Link ECU, Deatschwerks 1300cc injectors, Engine Rebuilt at 93,920km now 103,000 New short block, Bored and honed to +10. Manely piston, rings and pins. Nitto I beam, Nitrated crank. Race bearings (Con Rod and Mains). 11mm APR Studs. Cosworth baffle plate. Twin plate clutch APS Turbo Sr57, APS intercooler and blow off valve. Spec C Intercooler sprayer bottle Cermic coated headers Custom fuel surge system PWR radiator TS

$35,000 as a roller OR $50,000 as a complete car 1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED

For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic

Mazda RX8SP Tarmac Rally Car Drastic price reduction - must sell. Turbocharger, intercooler etc. removed and sold separately. Engine just rebuilt by Raceonly. First Owner was Mazda Australia, this is the genuine article – not a replica. Built for Allan Horsley with the purpose of winning Targa Tasmania. A ‘best of everything’ project Allan hoped to repeat the success of the RX7SP. Magazine article here: https://www.carsguide.com.au/car-news/mazda-looks-to-next-targa-24061?fbclid=IwAR3d3luBSSeLK