40 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8
M3 // 04 GENUINE E46 M3 MANUAL 6 SPEED MA LOG BOOK. NATIONAL SPEC WELD IN ROLLCAGE. 9.5x18 race wheels, Yellowspeed c/overs, new factory clutch flywheel assembly, CSF upgrade oil cooler, Circo race pads. Production Car spec. A lovely road car prior to conversion. These rare cars are climbing in value being the last of the blistering 3.2 famous 6 cylinder. Best value M3 available.
6
Roll CageLog Book
Unleash the Beast: Impeccable Subaru STI Circuit and Time Attack Racecar for Sale! One of the Fastest Subaru's in Australia – Clocks 1.11.1 at Queensland Raceway National Track! Over $350,000 Invested! Key Features: Exterior and Interior: - APR wide body kit and custom Plexiglass door windows - Full weld-in Roll cage for maximum safety - Resprayed in eye-catching WRC Blue (Jan '23) with a white interior finish - Currently wrapped in satin grey. - Sparco Circuit Seat with
9
Roll CageLog Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts
10
Roll Cage
THE 2023 DEPUTY 4 hr ENDURANCE CHAMPIONSHIP WINNING SUBARU IMPEZA IS UP FOR GRABS. UNMODIFIED FROM ITS WIN. Round 1 .1st place Round 2 .1st place Round 3 .3rd place Round 4 .2nd place Round 5 .1 st place Round 6 .14th place Round 7 .2nd place Round 8 .3rd place BUILT TO RUN SPECIFICALLY AT PHESANT WOOD CIRCUIT IN THE DEPUTY 4 hr enduros .. IT ALSO TOOK OUT THE 2023 SUMMER SERIES Round 1. 3x1st and a 2nd place. Round 2. 2x 1st and 2 x 2nd place. Round 3. 4 x 1st places. The car has proven re
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
10
RegisteredRoll Cage
MY03 STI Tarmac Hill Climb / Circuit Sprint Car Built to be reliable and fast • Aust Delivered MY03 STI • 207,000kms • Handbook Serviced and Upgraded at S&J Automotive o MRT S/S Turbo Back Exhaust o MRT 500HP Fuel Pump o S&J VVT Upgrade o EcuTeK Type 3 Custom Dyno Tuned with 210kw ATW o Rota 18 x 8.5” Wheels o Federal R-Specs 235/40 R18 o Half Cage o Harnesses o new Extreme competition clutch o Cusco Brake Support Bracket o Perrin Wing Stabilisers o Coil over suspension A very c
6
Log Book
$60,000 ONO plus GST Mygale SJ11A Duratec Formula Ford, ex Fletcher Harris car, purchased by McLennan Motorsports in January 2022 as a practice car, but only used twice, before moving up to Porsche Sprint Challenge. Motec colour display c125 New Mono steering wheel and quick release boss. New car and engine wiring harness New floor New white paintwork to all body work 4 x Spare wheels 1 x Nose Cone and bonnet Sachs shocks 4 way adjustable rebuild in 2022. Various Ratios New brake pads Troll
14 1
Roll CageLog Book
Honda Integra DC5 Type R – Production Touring car Extensive history with Bathurst 12 hour class victories, Amchamps class victories and State class victories to its credit. Clean car and maintained (to a high standard) more than it is driven. Originally built from a brand new 0klm shell by Conroy Motorsport, it is a satisfying car to drive and makes a noise that would put a smile on anybodies face! This is a highly competitive car in its class, and would make an exceptional base for the Bathurst
5
Registered
Vrsf downpipe Vrsf midpipe Armaspeed cold air intake Hardrace rear upper control arms Hardrace front sway bar end links SPL front thrust arms bushing SPL/Turner motorsport front lower control arms Hardrace rear toe links x2 pairs Hardrace rear traction links x2 pairs Turner motorsport rear sway bar end links White line sway bars Turner motorsport diff bracket/poly bushings KMP steering wheel Nitron R1 racing suspension Alcon CAR89 BBK Pagid RSL29 pads Alcon 380mm rotors Recaro RSG Fia Recaro
5
Roll CageLog Book
Honda is in my opinion one of the nicest made and presented TCR cars available on the market. This car was built new by JAS motorsport in Italy and originally owned by Finlay Crocker in the UK and imported to NZ by us in August 2019. Honda is one of the only TCR cars to run Motec software Total KM's - 7821kms (Gearbox and chassis) Brand New Engine and Turbo Fitted before HIghlands NZ Finals in 2020. New engine and turbo has done 1441kms only. Replacement recommended by JAS Motorsport at 7000km
12
Roll Cage
1999 Subaru WRX Impreza GC8 Car has been built and modified for Track day and Sprint use. Car was developed on the emphasis of handling and reliability, whilst maintaining a clean car that presents well. Car can be returned to Road registered if required. I still have all original parts and interior pieces. Engine has been built by Subaru Hamilton, and has a EJ207 STI engine installed - Semi closed Deck. - 14mm ARP head studs - DeatschWerks 1000cc Side feed injectors - Haltech PS1000 Tuned on
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
7
Roll Cage
2000 Subaru WRX Race car/Track car/Hillclimb car Car was built from a road car 5years ago, every nut and bolt has been turned on the car. Has been painted inside and in the engine bay gloss white in 2pac, wheel wells have been painted with septone black sound deadener. Has state level bolt in cage done by bond rolls bars and is registered. All other upgrades and work is listed below any other questions or enquires please feel free to message or call me, inspections can be arranged. Can help wi
14 1
Roll CageLog Book
EDITED 2/5/2024 1993 Honda Civic EG5 hatchback, logbooked as 3J Improved Production. Fitted with B16B Type-R 1.6 litre engine and Type-R S80 five-speed gearbox with 1.5-way Kaaz LSD. Raced for the last three seasons in IPRA NSW Under 2-Litre, as well as various other events. Audited at recent MA round at SMSP (passed). Built to be fun to drive, easy to work on and affordable to run. Regularly serviced and maintained by professional race workshop. Spec highlights; *EG5 shell, sunroof remove
7 1
RegisteredRoll CageLog Book
1997 Japanese import v4 STI 90,610 km. Alloy bonnet swapped to standard at some time prior to 2002. Modified for circuit racing and tarmac rally with emphasis on reliability and handling. Fully registered in Tasmania since 2002. Driver's seat belt operational. Roll cage – CAMS logbook. Battery isolation switch with removable key, window net. Engine rebuilt by Robin Berado and associates in Brisbane. Street force modified heads, closed deck block (welded). Billet con rods, forged pistons and c
6
Roll CageLog Book
2003 WRX used for sprints rally & track days. Very reliable great entry level car. 200km on new clutch & gearbox. Near new front rotors, front and rear pads. 2nd set of rims & tyres. Brown Davis state level roll cage. Car is logged 3J. Maintenance & race prep by Ravage race works
7
Roll Cage
ED Civic 3J Improved production CAMS registered cage B20/b16 engine with Type r gearbox 1.5way LSD Built B18C also available 282mm front brakes. Rear disc brake conversion Hondata s300 Surge tank and external fuel pump Koni shocks
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.
5
PRICE REDUCED.... Last buyer reneged on deal. Owner has New project and looking for quick sale. Engine Honda 2 litre VTec prepared by ABE, B16 A head, over sized manly valves and springs, Kelford Cams, Vernier gears, Quad throttle body injection with fresh air custom air box, B18C block Golden Eagle 2 litre sleeve insert kit fitted, manly rods pistons engine fully balanced, custom ceramic exhaust headers, big bore exhaust to rear also ceramic coated, dry sump oil system with large capacity tan