SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

202 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

10
Roll Cage
Log Book
For Sale 2023 Australian Production cars Championship Class winning VZ Commodore SS Production Car This Car was Built from a Replica Touring car Originally and Could easily be taken back to that spec Multiple podium and round wins in Australian Production cars Championship 2023, 2nd in Class Bathurst 6 hr 2022 Fresh LS1 Built and Balanced by SP Auto Engineering with all Good Quality gear Moroso Accusump Oil cooler Full National Spec Roll Cage With Motorsport Australia Log Book wheels 2 x 18

Biggera Waters QLD, Australia
Share
Watch
9
Sold
Was $16,000$12,000
FOR SALE VN V6 5 speed Commodore Rally Car $12,000 with all spares or $10,000 car only This car has only done a hand full of event mostly T.R.E’s and a couple of rally sprints. The car includes: • Intercom • marsh seats • SA rally reg • MSA (CAMS) approved cage Other spares include: • 2x T5 gearbox • 2x complete diffs (housings, axles ECT) • Near complete set of panels • 3x sets of wheels with well used rally tyres Won’t come with belts due to needing new ones because being out of date. It is

Mount Gambier SA, Australia
Share
Watch
6
Roll Cage
Log Book
For Sale The fastest trophy car in Australia, car is immaculate inside and out. This car finished 2nd outright in the 2016 Bathurst 12 hour and 8th outright in the 2017 12 hour, the car was re-shelled and serviced by Nismo Japan after the 2017 race and was never raced. I purchased the car from Nissan Australia last year and competed at Challenge Bathurst where I posted a time of 2.05.01 with a 3 tenth lift due to traffic, we then raced the car at the 1st round of GT World Challenge at Phillip Is

Prospect NSW, Australia
Share
Watch
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree

Cairns QLD, Australia
Share
Watch
7
Roll Cage
Log Book
2006 Subaru WRX Rally Car. The following additions have all been installed brand new and only used for 1 rally: - Coil over suspension with canisters - Rally Safe Compatible - Monit Trip Meter with foot pedal - TerraTrip Head Sets - Gold Speedline Corse Wheels - Rally Tyres - Carbon Fibre Air Vent - New Radiator Overall: - Sparco Sprint Seats (passenger seat brand new, used for 1 rally) - Sparco 6 Point Harnesses (passenger side brand new, used for 1 rally) - CAMS approved roll cage - CAMS and A

Nullica NSW, Australia
Share
Watch
5
Roll Cage
Log Book
Ready to race current spec APRA race proven winning car. Motor only 140 klms, 1 race meet old. SR20 Gearbox done 4 meetings. Controlled suspension 6 meetings CAMS National spec roll cage CAMS log booked ASSA log booked All the good gear at no expense spared on build and maintenance. Electric water pump Electric power steering Cold air box New clutch Remote oil filter Oil cooler Oil accumulator Brake booster delete Braided brake lines, brake bias to rear brakes. Nolthane bushes throughout. New i

Bathurst NSW, Australia
Share
Watch
23
Registered
PRICE DROP I have now purchased an Aussie race car so sadly the subaru STI has to go. BTW Aussie car is slower which sucks. Here we have a ROAD REGISTERED RACE CAR. Well presented and strong sleeper race car that you can drive to the track. Extensive work done throughout motor, gearbox and suspension. As usual many dollars spent but all work done by professionals. This car has been a top runner at all events entered and probably would be the top runner with a better driver. The reason for sal

Emerald Beach NSW, Australia
Share
Watch
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.

Springwood NSW, Australia
Share
Watch
4
RE LISTED Nissan Exa Sports Sedan ROLLER Cams log book Well known Victorian car. Full space frame / fibreglass panels. Built to suit 20b rotary. Left hand drive. Lots of original spares, supra gearbox and remote shifter, tail shaft, R200 diff (plus spare) Full 20b exhaust system, muffler and side outlet. Moulds, spare fiberglass bonnet and front spoiler, clutch & flywheel, front engine mount & engine / gearbox mount plate. 16x10 wheels with slicks and spare 15x10 with wets. Fuel tank, lines with

Macedon Ranges, VIC, Australia
Share
Watch
15
Full roller ready for any engine combinations you wish Nissan Skyline r33 1995 full roller $14,000 Motor an all parts to do with motor is sold Only have the gearbox available If not I will just keep the car As I have owned this car for over 21 years I started building it about 15 years ago and then it was put into storage for over 10 years Car still has got all of its identification plates The rego run out about 16 years ago I believe it still can be registered in south Australia Ch

Glenalta SA, Australia
Share
Watch
10
1998 Nissan 180SX, Toyota V8 Price NZ$24,000 FOB Japan Call Matt In Japan 0081-70-3802-3006 or My NZ Number +64-22-0878238 , this vehicle is in Japan, it will be sold FOB, Free On Board, you have to pay the ocean freight, customs, GST, duty. The condition is good, apart from a few small dents, and the clear is fading in places. The engine is a bolt in swap, no cutting or welding, everything is bolted in. Spec : Engine 1uz-fe Documentation and export certificate Year Type=1998/ 9th Month Man

Tauranga, New Zealand
Share
Watch
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.

Arcadia NSW, Australia
Share
Watch
1
2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

Marangaroo WA, Australia
Share
Watch
17
1986 Holden Commodore VL Sedan Track Car - 3L Petrol - 5 Speed Manual - RWD - 182,071 klms RB30 Stroker (3.4L) Mini Spool VN Axles 5 Point Safety Harness Full Cage Fuel Cell Previously scrutinised.

Capalaba QLD, Australia
Share
Watch
14
Commodore Vr/Vs Totally professionally built and still in great condition. Currently has Improved Production Log Book. Race car is sold without engine and gearbox ready for your own transplant for the category. Has full floating axle diff with full spool, spare ratios, big brakes, and extensive spares. Race car can be carbureted or fuel injected engine with high tech fuel tank and fuel system. Option for purchase a fully reconditioned complete 355 stroker motor to be assembled and with a gearbo

Taren Point NSW, Australia
Share
Watch
9
Gc8 wrx 2jz!!! Was a four door but had a wide body installed and rear doors deleted to fit the supra IRS in. 2jz conversion Built r154 5 speed All supra subframes and mostly a gc8 shell with everything supra underneath. All work on the car was done by top class automotive in Sydney! All fab work done by mongster fab in Sydney Brand new haltech elite ecu, look, and dash Just upholstery did the dash in alacantara and seats in alcantara blue diamond stitch. Tuned by pulse racing. Made 700hp th

Canungra QLD, Australia
Share
Watch
34
Personally imported from New Zealand, owned by an Engineer in Possum Bourne’s race team. Would be suited to Road, Race or Targa events. This won the open class at QLD Time Atrack in 2017. Full specs available via a pdf.

Eagle Farm QLD, Australia
Share
Watch
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers

Barrack Heights NSW, Australia
Share
Watch
9
Location Tassie. Fresh, excellent, reliable Irving head motor. Logbooked. Extensive cage, HR seats, current SI Rego. Recent bare metal respray..No expense spared. Well sorted over many years of development. Fast. Extremely competitive Historic hillclimb or circuit capable. Sadly offered as I am hanging up my helmet. Genuine enquiries only please.

Airlie Beach Queensland, Australia
Share
Watch
1
One owner from new 2006 Subaru sti wrx sti road/race/rally car! S and J billet engine with blouch dominator with no expense spent! 600hp atw road drive able car which can be taken to track or drag strip then driven home. more details upon enquiry.

Perth Western Australia, Australia
Share
Watch