18 items with Roll Cage for sale

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Delivered new by McLaren GT in December 2016. New engine installed in May 2018, has less than 1300 kms. New gearbox installed in January 2018, has less than 3,300 km. All MGT upgrades for the 650S GT3 included in this car. Maintenance, lifing records, mileage, other documentation and vehicle viewing all available upon request. Last raced Phillip Island in 2018 and has since been privately owned with minimal private track day usage. Vehicle maintained by McElrea Racing / MR Tuning. Come

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro

Nissan S13 Motorsport Australia log booked with approved 6pt Roll cage Selling on behalf of a mate - message me for his details S15 VCT engine VIPER ECU tune by AllStar Malaga WA with Anti Lag and launch Control Fresh GT25 turbo (1.5 events old) Fresh 5 speed gearbox (1.5 events old) MCA fully adjustable suspension LSD diff 4 spot Nissan front calipers 2 spot Nissan R33 rear calipers Kevlar tank guard S15 intercooler (side mount as required by Rally rules) Alloy Radiator Bias adjustable peda

1992 S13 Nissan Silvia. SR20 DET Log Booked Race Car 8 Point Tower to Tower roll cage. Comfortably fits 6’4” driver MCA coil overs with remote reservoirs SR20 built and tuned by JPC 260kw at the wheels Garret Turbo Intercooler sprayer Motec Computer with standalone engine loom Motec Dash S14 5 speed built by Neat Gearboxes 2 way Diff Strengthened S14 rear subframe Fully adjustable rear suspension with alloy knuckles S14 front X member and strengthened LCAs Alloy fuel tank Surge tank Braid raci

DESCRIPTION: Nissan R32 Skyline GT-R, Year: 1989 Powerful neck snapping performance ! 2-Door Coupe, All wheel drive Odometer: Indicating 127,512 Klms Engine: 2.8 Lt Turbo, Transmission: 5-Speed Manual, Grey Seats x 4. Currently tuned to be “run in” with new engine build by C - Red in Perth and built to performance specifications. Roll Cage Engineered in NSW by Phil Scoll – Automotive Consulting – as a Modified Production Vehicle. Work carried out by Peter Hopkins of Advan Performance.

Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with

Whether you are looking to race or register, this Nissan 180SX represents a unique opportunity to get your hands on a truly special piece of automotive engineering. Built with an open chequebook by the Wizards at 'ARE' back in the mid 2000's, this car was designed to destroy just about anything at a dyno compettiton with its LC Engineering Toyota 3RZ under bonnet, turning out a truly astonishing 782hp atw on a mere 29PSI of boost. The engine was designed and built to run up to 50psi, so you ca

History: Competition history from 1977, mainly raced Amaroo & Oran Parks. Original & subsequent Logbooks come with the car. Restoration: Completed to 1983 spec for Certificate of Description purposes. Livery: Rapid Transport Mechanicals: 1380cc (new build by Ken Nelson 08/09/21) Block: Morris 1100s Crank: Steel Russell Head, CAM. All the best components I could afford for reliability & performance Pistons: Russell Eng