23 items with Roll Cage for sale

Holden Torana (LJ), Group Nc Log booked. 202 engine running 45mm triple webers and M21 Gearbox. 336 Detroit locker with fine spline axels, Koni Shocks, 4 spot Volvo front callipers, 4 link rear end watt’s linkage and Chrome Moly Cage. Open to reasonable offers.

Toyota Celica TA64 Group B Rally Car Unfinished project Most of the heavy fabrication is done and designed to resemble the works car with a modern spec MA roll cage. No rust. Includes lots of rare race and original parts. Too much to list. Two 3TGTE engines plus extra parts,cams,cranks,ect. Toyota 5 speed R151/R154 gearboxes and parts, inc one close ratio dog box. (needs repair). Late model Toyota "G" series read diff. Steering parts and racks, inc a quick rack. All the molds for body kit inc

TFH Racing has one of our Toyota 86 scholarship series cars for sale. Race ready for the Toyota Gazoo Racing Australia Scholarship Series. Maintained to the highest standards by P&K Raceprep and the TFH Racing team. The car has a Motorsport Australia log book. Comes with a spare set of wheels. Based in Queensland.

VN commodore.with VP supercar kit. Adjustable Coilovers SV5000 bars also has previously been iprc 2 sets of wheels full cage seat and harness Converted to 308 with VS k frame brand new TKO gearbox custom tailshaft side exit exhaust Astra power steering car has a straight body with good paint AASA and CAMS log booked Turn Key Race Car

Toyota 86 Scholarship Series Race Car Very successful in the national Toyota Gazoo Racing Australia 86 Series, multiple pole positions and strong race results. Complete rebuild so car is ready to hit the track Engine dynod showing good results Completely new body and panels (mismatched panels can be wrapped if required) Includes 6 rims Multiple spare panels Spare control arms Other than AIM camera system and radios, car is ready to race. More than happy to come out on the first test day

Toyota 86 K-Swap After many years of research and development, its time to move on to something new. Anyone who has developed a car knows how much work and rework it takes to develop something and this car is no exception. Key information below. Engine - K24A4 closed deck and fire ringed (fresh build < 25 hours). - Forged build (Skunk rods and wiseco pistons) - standard crank - race bearings. - Garrett G25-660 with water cooled wastegate. - K-power swap kit (engine mounts, intake manif

This well known Queensland Group Nc Torana is a GTR XU-1 clone with a LJ body built in May 1972. First developed by Greg Burrowes, in 1994, it ran at Lakeside’s Historic Queensland in 1995. Originally the car was finished in the standard, but quite rare, GMH Linamint and now presents in a definitely more vibrant ‘ Kermit Green’. In October 2005 the GTR passed to David Malone who for the next 8 years was active in SE Queensland sprints and hill climbs with some circuit work at Morgan Park, Warwi

Need to sell - already bought another toy! 70,000kms - 2ZZ Engine (NA) Currently full rego in TAS (was a repairable write off but has been cleared and has full rego - have pics of damage/repairs from previous owner). Ex-Exige Cup race car with full cage, CAMS logbook etc. Ohlins shocks Bigger front brakes Spent 3k on new Extractors and exhaust New hollinger 3rd/4th gear upgrade. Fully serviced recently (all fluids) and wheel aligned. Super reliable cheap fun that can hassle much faster cars a

For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001 with a large spares package. Also suitable for 3J Improved Production IPRA as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely well built and features an extensive weld in national

FOR SALE V8 5ltr 304 stroker engine with 650 double pumper Holley carburettor Pacemaker headers with side pipes Strut brace Power steering cooler 9.5lt winged sump 6 speed Tremec gearbox 10 bolt LSD Bilstein shocks all around Fully seam welded Near new Wilwood front callipers, VL callipers on rear 6 point welded cage Wired to rally safe standards 80 litre fuel cell 6 point harness 17 x 8, 17 x 10 custom Simmons Velo seat Log booked for both CAMS & AMSAG Presents very well for the money. Jump i

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

Extremely quick Toyota 86 that has run in 1 Hour endurance racing in NZ. For reference of lap time approx 1 second per lap slower than Marc2 Mustang and Porsche 992 cup from running last season relative to an approx 1.30 laptime. Motorsport NZ homologated cage can be recognised per Motorsport Australia Schedule J part 4.2. Sandblasted shell with comprehensive roll cage, car finished with PPG Matte black Paint. 7 Litre LS Engine – Dry sleeved block, CNC Heads, Dailey dry sump etc. Tilton drive

One of 2 x A9X’S used by Bob Morris to win the 1979 Australian Touring Car Championship (ATCC). Raced Bathurst 1000: 1977 and 1978. ATCC outright wins in 1978 and 1979. 3 owners from new, original cams logbook. Raced in period by multiple Le Mans 24Hr, Daytona 24hr, Spa 24Hr, Bathurst 1000, Indy 500 winners: DEREK BELL, DIETER QUESTER, JONNY RUTHERFORD, JANET GUTHRIE & of course; BOB MORRIS. Original, unrestored and magnificent. More pictures and information at: https://www.ecuriebowden.c

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.

Historic Gemini Coupe Sports Sedan. Originally built by John Brookfield for Peter Brock, circa 1977. Previous owners include Rowan Harman, Robin Doherty, Darren Hossack, Grant Munday, Stephen Craig. ENGINE:- 13B Extend Port FD Series 6, Ceramic Apex Seals, Balanced and matched rotors, custom exhaust manifold, modified inlet manifold, Full Throtle Engineering crank sensor, Bosch Motorsport 2000cc injectors, OS Giken triple plate clutch, Borg Warner 91/74 alloy core turbo, 1.45 twin scroll exhaus

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P