34 items for sale

Aussie Racing Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purpose built tilt trailer with winch. Sydney NSW Log book $16K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Ford TF Cortina LHD, Full Tube Chassis Sports Sedan. 3D Sports Sedan Log booked in 2001 Steve Vigurs Built Chassis Inboard, Cantilever Front Adj Coil overs, Rear Coil overs. RB Engine, Forged Bottom End, RB25 Head, PRP Trigger Kit, Custom Turbo Manifold and Exhaust Intercooler, Pulsar 3582 Turbo, Turbosmart Gate and BOV Haltech Elite 2500, IC7 Dash etc and Full rewire undertaken in 2022 PPG Sequential 6spd Gearbox, New clutch etc all done in 2022 Borgwarner M78 Diff, Cambered, Floater's, Recent

The vehicle has been used for Regularity events at Mallala Circuit and is fitted with the following; 3 SGE NA engine with mild cam, Advanced headers with ceramic coating, stainless steel exhaust and twin mufflers. Power - 125Kw at the rear wheels. Oil catch can, pod air filter, engine oil cooler fitted with braided lines. Penrite fully synthetic racing oil used. LINK ECU G4 TST205, Custom fascia with LINK MXS Strada 5" digital dash monitoring fuel pressure and temperature, oil pressure and tempe

Championship winning Spectrum 011K as raced by Daniel Holihan. This car has multiple wins, podiums and championships to its name, along with a freshly rebuilt motor built by Luke Ellery from Ellery Motorsport down in Victoria. This car has been maintained by World Time Attack Champion Barton Mawer in the past and has a load of data and engineer tricks and tips to go with it. This car was built from the ground up only 2 years ago which was previously a Duratec raced by Tim Hamilton. It comes w

Toyota Supra drag car, full chassis complete ready to race. 410 cube SBC running methanol ,all engine specs can be supplied , new Ray Edwards carburetor, hughes powerglide with convertor to suit, 9 inch 35 spline floating axle with 1/4 & 1/8th mile gear sets, new front runners and slicks, car runs straight and consistent with engine and trans assembly only doing 12 passes, Andra tech and paper work available

This very special Ford Escort Mk I is not only a super-competitive track car but absolutely looks the part as well. Log booked for 3J Improved Production, the Escort was built by its current owner and first hit the track in 2007. Under the bonnet is a 2.0L Yager Performance built Duratec engine mated to a brand new Quaife heavy duty six speed sequential gearbox. The Escort runs a Motec M84ECU as well as a Motel CDL dash, displaying all the necessary data to the driver. The powerplant has been

For sale is this very tidy Wolf F1 Mistral. Equipped with PSA 1.6lt Turbo engine Car has run 3600km / 23 hours It has all the options and is ready to race. Details on car below: https://www.jammotorsport.com.au/wolf-sm Customer has no time for racing at the moment so has to move it on. Genuine enquires only. Based at Jam Motorsport @ The Bend Motorsport Park. Jam Motorsport storage, support and arrive and drive available.

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.

Race winner pole sitter and fastest lap holder. Ex Aaron Seton Toyota 86 series car available now. Grab yourself a competitive car with all set up data now that the calendar is set for the 2024 TGR scholarship series and beyond. Will consider an arrive and drive arrangement if not sold. Car has had a Comprehensive rebuild for 2023 season and comes with plenty of spares inc wheels practice tyres, good gearbox, spare shocks, hubs, front rotors, brake pads, wheel alignment gear and numerous small