44 Car, Bike or Kart with Roll Cage for sale

Toyota 86 Specifications Build date 05/16 Vin JF 1ZN6K81GGO35975 Colour White Approved MOTOR SPORT AUSTRALIA AGI Roll cage approval no 71220 Tuned to E85 156.4 kW Racerom set up Lightened flywheel competition clutch New Ventas Hancook tyres 225 -40ZR-18 Wheels JAPAN JDM Concept Exhaust ARK 3 “Stainless Extractors ceramic coated Liverpool exh External Battery Isolator SPARCO Seats and Harnesses driver and passenger Car has been built up to AUSTRALIAN Motorsport standards, Has once only

As Raced by Bradi Owen in 2023 and Declan Frazer in 2019 this car was meticulously built in 2019 and has been maintained with no expense spared. Never been crashed or had any major repairs, Highly competitive car. Log booked, all seals etc, ready to go racing in the Toyota Gazoo Scholarship Series.

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Toyota 86 K-Swap After many years of research and development, its time to move on to something new. Anyone who has developed a car knows how much work and rework it takes to develop something and this car is no exception. Key information below. Engine - K24A4 closed deck and fire ringed (fresh build < 25 hours). - Forged build (Skunk rods and wiseco pistons) - standard crack - race bearings. - Garrett G25-660 with water cooled wastegate. - K-power swap kit (engine mounts, intake manif

Fresh from Europe *** 2023 Porsche Mobil 1 Supercup Car # 2 Harri Jones *** We are honored to present a very unique opportunity to the Australian Motorsport community. Out of the Porsche Supercup Season 2023, one of the three top Lechner Racing Porsche 992 Cup cars has landed in Australia. The car was driven (piloted) by Harri Jones in his Rookie season where he finished in 2nd place. Again congratulations from our side. The car comes in its original BWT livery, maintained to the highest stan

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

The vehicle has been used for Regularity events at Mallala Circuit and is fitted with the following; 3 SGE NA engine with mild cam, Advanced headers with ceramic coating, stainless steel exhaust and twin mufflers. Power - 125Kw at the rear wheels. Oil catch can, pod air filter, engine oil cooler fitted with braided lines. Penrite fully synthetic racing oil used. LINK ECU G4 TST205, Custom fascia with LINK MXS Strada 5" digital dash monitoring fuel pressure and temperature, oil pressure and tempe

Toyota Supra drag car, full chassis complete ready to race. 410 cube SBC running methanol ,all engine specs can be supplied , new Ray Edwards carburetor, hughes powerglide with convertor to suit, 9 inch 35 spline floating axle with 1/4 & 1/8th mile gear sets, new front runners and slicks, car runs straight and consistent with engine and trans assembly only doing 12 passes, Andra tech and paper work available

2022 Subaru BRZ. Why spend $50K on a bashed up old T86/BRZ. LOG BOOKED 3E SERIES PRODUCTION CLASS Shake down at last year's Challenge Bathurst. Only 5000kms on the clock. 800kms since build complete. Build includes: - New Brown Davis Roll cage - New Racetech Seat - New RPM 6pt Race Harness - New Sparco wheel and Quick Release Hub - New 6 Port Isolator fitted - New Radium dual catch cans fitted - New MCA Red Coilovers fitted - New 4 Pot AP Racing 5000R calipers at the front and 2 Pot APs at th

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

2019 Porsche 991.2 GT2 RS Clubsport Motorsport Australia Log Booked. Legible for Australian GT Invitational. As new condition 0.576kms only Production Number #129/200 Spare Package includes - x2 Sets Spare Wheels - Air Lance - Fuel drain system - Air Jack stands More information available on request. •Single-seater, non-street-legal race car •Basis: Porsche 911 GT2 RS (Type 991.2) Like the street-legal 911 GT2 RS, the 3,064 pound (1,390 kilogram) Clubsport version is equipped with PSM (

ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje

Toyota MR2 SW20 built for track days and road use. Car is in great condition. Engine 5SGTE 2.2l stroker crank Aeroflow turbo Custom exhaust Custom air cleaner and intercooler Haltech engine management Runs E85 and flex tuned 380Hp at wheels( its fast...) Gearbox, 5 speed with locked diff. Custom alloy radiator/thermos fans Custom engine compartment extractor fans Power steering, power windows no aircon. Race seats and harness plus standard seat belts fitted. Roll cage Mod plated for qld. Afte