34 items for sale

Honda Integra DC2 Race car. Built from a road car throughout 2015/16 (with new engine this year). Completed a total of 4 events in 8 years so due to this inactivity the car is offered for sale. Body is a straight rust/accident free shell. Has a full bolt-in alloy roll cage, Sparco Evo race seat and Schroth harness. Engine is an Abe Race Engines built B Series 1800cc in a mild state of tune. Runs Supertech hi-comp pistons, Toda B Spec cams, Skunk2 Throttle body/intake, baffled sump, Hardrace mo

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart, Manager of Gibson Motorsport R32 Program) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped an

Toyota 86 Specifications Build date 05/16 Vin JF 1ZN6K81GGO35975 Colour White Approved MOTOR SPORT AUSTRALIA AGI Roll cage approval no 71220 Tuned to E85 156.4 kW Racerom set up Lightened flywheel competition clutch New Ventas Hancook tyres 225 -40ZR-18 Wheels JAPAN JDM Concept Exhaust ARK 3 “Stainless Extractors ceramic coated Liverpool exh External Battery Isolator SPARCO Seats and Harnesses driver and passenger Car has been built up to AUSTRALIAN Motorsport standards, Has once only

This shining example of a great race car is now available for purchase. Professionally built by RM racing cars from a brand new chassis to 3E specs, this car only has about half a dozen race meets of use and is always competitive with 1st in A2 class at the 2021 Bathurst 6 hour, Class pole (in an A2 class lap record at the time) and 2nd in class finish (in a photo finish) at the 2023 Bathurst 6 hour – as highlights of its short career. The car has never had a large hit and is super clean through

Mustang Group NC Been a race car most of its life Previously raced in another class but I have been accumulating parts to run in Group NC including Marty White built NC legal 351 Windsor with quad 48 Webber's plus a brand new Super Victor if Webber's are not wanted Close ratio top loader with rose jointed shifter 9 inch true track New Group N legal brakes front and rear Koni shocks set up by Glenn Seton Original rear seat in immaculate condition Original dash etc plus brand new dash pad

1998 Evolution 5 Track / Tarmac Rally Car. Please ask for permission to by if needed before calling and inspecting, Car is of great quality and priced very sharply. Vehicle is fully complied (not a race only import) so any event needing special rego etc is no problem. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by

Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged

1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/

Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.

Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts