24 items for sale

Toyota 86 Scholarship Series Race Car Very successful in the national Toyota Gazoo Racing Australia 86 Series, multiple pole positions and strong race results. Complete rebuild so car is ready to hit the track Engine dynod showing good results Completely new body and panels (mismatched panels can be wrapped if required) Includes 6 rims Multiple spare panels Spare control arms Other than AIM camera system and radios, car is ready to race. More than happy to come out on the first test day

As Raced by Bradi Owen in 2023 and Declan Frazer in 2019 this car was meticulously built in 2019 and has been maintained with no expense spared. Never been crashed or had any major repairs, Highly competitive car. Log booked, all seals etc, ready to go racing in the Toyota Gazoo Scholarship Series.

Toyota 86 K-Swap After many years of research and development, its time to move on to something new. Anyone who has developed a car knows how much work and rework it takes to develop something and this car is no exception. Key information below. Engine - K24A4 closed deck and fire ringed (fresh build < 25 hours). - Forged build (Skunk rods and wiseco pistons) - standard crank - race bearings. - Garrett G25-660 with water cooled wastegate. - K-power swap kit (engine mounts, intake manif

Selling a single seater racecar chassis. Comes with a plethora of parts for the suspension and steering mechanism as well as having the vi-pec v44 ECU with some of the wiring started. Most parts have been shown in the photos. All will be included in the final sale. Everything is in good shape and has been stored inside. All suspension linkages are there in the crate as shown in the photo with them spread out.

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Toyota sprinter AE86 rally car 70k for car Up for sale is a newly built rally car from a Aus delivered rust free shell 4age Eng on a set of 20 v throttle bodies, running a bigger injection system and a high lift adjustable cams Engine is only after getting a full freshen up from the ground up. All new auxiliary bits replaced, running a 4 to 1 high extractor custom built and a full new 2 inch exhaust system Quaife 60g sequential gearbox that has done one test stage of 5ks at an ARC event

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro

1992 S13 Nissan Silvia. SR20 DET Log Booked Race Car 8 Point Tower to Tower roll cage. Comfortably fits 6’4” driver MCA coil overs with remote reservoirs SR20 built and tuned by JPC 260kw at the wheels Garret Turbo Intercooler sprayer Motec Computer with standalone engine loom Motec Dash S14 5 speed built by Neat Gearboxes 2 way Diff Strengthened S14 rear subframe Fully adjustable rear suspension with alloy knuckles S14 front X member and strengthened LCAs Alloy fuel tank Surge tank Braid raci

Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with

Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen