23 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
13 1
Roll CageLog Book
Toyota Supra drag car, full chassis complete ready to race. 410 cube SBC running methanol ,all engine specs can be supplied , new Ray Edwards carburetor, hughes powerglide with convertor to suit, 9 inch 35 spline floating axle with 1/4 & 1/8th mile gear sets, new front runners and slicks, car runs straight and consistent with engine and trans assembly only doing 12 passes, Andra tech and paper work available
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
15
Roll Cage
ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
9
Roll Cage
For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
10
Roll CageLog Book
For sale Toyota Gazoo Racing 86 series car 2014 GTS model Originally built by Neal Bates Motorsport Complete ready to race in either the Toyota Gazoo 86 scholarship series. MA logbook NBM roll cage MCA reds AP Racing control brake kit Velo seat, harness and sabelt wheel Motec C125 dash and ECU Light weight lithium battery OZ wheels with Dunlop Direzza tyres Tagged and compliant sealed NBM motor and gearbox Contains all series control components to go racing $46,000 Contact Garry 02 6953
8
This BMW race car was built to a very high standard by Karl Begg in 2016, and then subsequently maintained and improved by Garth Walden and his gun team at GWR Australia continuously since my purchase from KB in 2017. Car has had an easy run under my ownership, competing only in the NSW PTC state championship from 2018 through to 2023 - with reduced appearances in the Covid affected years. Won B2 Class and second in the club championship in NSW PTC 2023. Very quick car in the right hands.
7
Roll Cage
TOYOTA 86 2014: Built for Sprints, Hillclimbs, Lap Dashes. SPRINTEX Supercharger LINK Engine Management Upgrade injectors Upgraded fuel pump Stainless headers MOROSO Baffled sump CERAMIC Clutch plate MCA REDS (as per race series) MCA Traction Mod Set (reduces understeer) CUSCO 1/5 LSD SPARCO Race Seat 6 Point harness AGI Half cage 18" Wheels Lightweight Odyssey battery Full service book came with lightly damaged car. Big emphasis on weight reduction down to 1080Kgs Only done 2 lap dashes since
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
3
Roll CageLog Book
Race winner pole sitter and fastest lap holder. Ex Aaron Seton Toyota 86 series car available now. Grab yourself a competitive car with all set up data now that the calendar is set for the 2024 TGR scholarship series and beyond. Will consider an arrive and drive arrangement if not sold. Car has had a Comprehensive rebuild for 2023 season and comes with plenty of spares inc wheels practice tyres, good gearbox, spare shocks, hubs, front rotors, brake pads, wheel alignment gear and numerous small
4
Roll CageLog Book
TOYOTA COROLLA SPORTIVO '04 Motorsport Australia Logbooked Welded FIA Rollcage Production Car Rebuilt 2zz Cusco plated LSD Competition clutch 15x8 Race Wheels Engine just rebuilt with blueprint cylinder head Race Seat Enduro Belts Coilover Suspension Well known rocket ship, economical to run and FAST. Suit production and endurance racing. Easy one to get on the track ready to roll for your next race.
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
7
Roll Cage
PRICE REDUCED! Car was a repairable writeoff, repair has been made and the car has been professionally modified to be a suitable track car. List of parts and work completed: GPT 3 FIA seat ( Hans compatible ) Steel Seat mounts FIA 6pt Velo Harness Kill switch Kill Switch Pull Cable Bonnet Pins Fire Extinguisher Roll Cage Padding x 3 lengths Window Net Window Net fitting kit Seat Slide Rail assembly Oil Cooler Harness Plates x 3 of Steering Wheel 350mm R28 Fixed Tow loop x 2 Boss Kit to suit to
11
Renault Race Truck The truck was completed for the 2006 Le Mans race in France. Engine power 1200- 1600hp + NOS. Driven in 2019 record 211km / h with old mechanics. Driven on 27.08.22 – 223km/h Car body beams, the cab is built from new parts. The rear axle is manufactured by Sisu Axles, 2.9: 1 transmission ratio, 100%-wheel lock, disc brakes. Front axle model Renault, disc brakes. Engine Cummins 11L ISM, Celect engine control with box. The engine has been overhauled 100% (all bearings rebuilt, c
10
Roll Cage
Original Valiant VG Pacer with E31 Track/Mod Pack Additions - Engine: 265 Hemi – Inductions: 350 Holley – Drivetrain: BorgWarner 4 speed, 3.23:1 Limited Slip Diff – Wheels: Compomotive motorsport ML with Yokohama Advan 048 tyres – Paint: Fire Engine Red – Interior: Black registered 2 seater, Cobra race seat with 5 point harness – Other Mods: Pedders Racing suspension, HP brakes, 6 point rollcage – RMS Engineering Certified
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!