43 items for sale

Genuine 12/02 Subaru WRX STI, Australian Delivered STI, Brembo Brakes, AGI Roll Cage, Sparco Seat, I purchased my STI 7 years ago to use as a track day car, the engine had been modified and dynoed at 300KW at the wheels running on E85, after my first run at Sandown the engine detonated, I had a genuine Subaru STI short engine fully rebuilt and I had a more mild tune put into the engine and running on 98 Octane, after racing many different vehicles over the last 40 years this is the most fun car

1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi

HIGH SPEC GRAVEL RALLY CAR, NEW MAXIMUM 207 SHORT MOTOR, RECON HEADS, ASSEMBLED & TUNED BY RACE TORQUE, WITH NEW VF53 TWIN SCROLL TURBO, MOTEC ECU, ALL UNDER 200KM. MCA GOLD REMOAT CANISTER SUSPENSION. GROUP N AP FRONT & REAR ROTORS & CALIPERS, TWIN MASTER CYLINDER BIAS BRAKE SYSTEM,HYDRAULIC HAND BRAKE. MAPPED CENTOR DIFF CONTROLLER, FRONT & REAR CUSCO DIFFS, 6 SPEED WITH NEW HD ORGANIC CLUTCH, ALL 180 STI, NEW DRIVE SHAFTS. TWIN FUEL PUMP SET UP WITH SURGE TANK. 8 POINT WELD IN ROLL CAGE. WING

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

2005 WRX STI was a genuine STI. Has complete hand made fibreglass and carbon fibre clip on front end. Runs a link GT4 ecu, tein suspension, rear wing, bigger turbo, front mounted intercooler, brembo brakes, brake ducts, running 295 nankang AR1 only a few laps old. Have run up to 315 tyres as well. Lightened flywheel with heavy duty clutch and also just fitted new bushes and linkages to gearbox so shifter is very smooth and small throw. Runs standard fuel tank with a surge tank in boot and 2 fuel

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Ready to pick up in September after a fresh rebuilt box! Highlights include

- MY05 STi Shell - ABW Motorsport wide body kit and doors, Plexiglass Windows, dry carbon roof
- Full weld-in roll cage - OMP Seat with head restraint
- Lifeline fire extinguisher with Novec Pressure System
 - 800HP/900NM PerFOURmance 2.5l with custom heads and fire lock head gasket and dry sump
 - Titanium custom 3.5-inch exhaust - PWR custom intercooler, radiator, and oil cooling package designed for circuit racing


2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

Race-Ready HQ Holden Kingswood! Looking to dominate the track with a powerhouse racer? Look no further than this HQ Holden Kingswood Race Car! With its impressive track record and performance upgrades, this beast is ready to tear up the asphalt and leave the competition in the dust. Key Features: 4th Place Finisher in Queensland Races - Proven Performance! Log Booked for Racing Authenticity Sturdy Aluminum Roll Cage for Maximum Safety Ratchet Shifter with 3-Speed Trans

For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/

NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,