21 Car, Bike or Kart for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
9
Log Book
Statutory write off. 1 owner, Almost brand new, immaculate before accident. FULLY drivable, NO airbag and NO seatbelt damage. NO structural damage. Only rear quarter panel damage. ALL BRAND NEW genuine Toyota parts required for repair included! Can arrange transport within Australia or export Worldwide. May consider trade-in.
29
Registered
Believed to be the very first Mazda RX-8 sold and delivered in Victoria - I'm the third owner, with the original having owned for 20 years purchasing and servicing at Ringwood Mazda. Personalised registration plates from day one - RX-801 are still with the car. I purchased the car in early 2023 as a non-runner and sent the car to Promaz in Thomastown, VIC who completely rebuilt the engine to exceed Mazda specifications costing in excess of $21,000 - all receipts, intricate details and photogra
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
26
RegisteredRoll CageLog Book
Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
14
RegisteredLog Book
2023 GR Corolla. Very much brand new. Selling due to needing something bigger for young kids. Great fun car. Regretful sale.
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
10
I am selling my beautiful Van Diemen RF 87 Formula Ford. Car is in Beautiful condition. Has C of D and has a good John Dean engine. Competed at Winton Festival of Speed 2023 where we finished 4th or thereabouts for the weekend. Car comes with some spares, pushrods, control arms and spare nose cone and nose box. Was recently restored and has all new brake lines and fittings. Motor has done 2 meetings. new rotors on the front. Gear ratios to suit all the tracks we run on. 2 set of wheels and tyr
8
Roll CageLog Book
S3 RX7 Rally car, fresh rebuild with only two events since completion. (2022 Alpine, 2023 Southern Cassic) 13B Bridge port with 48IDA, approx 250hp ATWs, stainless extractors, remote oil filter, new PWR oil coiler with new oil lines RX8 close ratio gearbox S3 4.89 LSD with strengthened housing MCA with remote canisters, two events old S4 steering, struts and 4 pot calipers All new wiring loom Twin carter fuel pumps Braided fuel and brakes through out Pedal box with Willwood cylinders Hydraulic h
12
Roll CageLog Book
Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams
27
RegisteredRoll Cage
1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R
9
Roll CageLog Book
Motorsport Australia Historic log booked group N Mach 1 Mustang Rotisserie restoration taken back to metal, retaining its original exterior paintwork, not a showpony but presents very well. All new mechanicals inc Dry sump Dart based 351 Windsor forged internals RHS heads built by Kanaris Engines 600+ HP, Haltech ECU, New TKX close ratio, 9” 3.89 Trutrack, 4 link rear end on fully adjustable coil overs all round. Motorsport hubs front on 2-peice hub and rotors, tubular upper and lower wishbones
8
Roll CageLog Book
Price reduced. 1996 Mallock Mk32B Supersports Nissan SR20 Turbo engine with FT200 Hewland transaxle. PI dash with Autronic computer Imported from UK new, build 3 of 9 cars. CAMS log book issued 1998. Full carbon fibre body work. Bodywork moulds included for front and rear, and front splitter section. 3x sets of ENKEI one piece centre lock wheels. 4pot AP brakes front and rear KONI Adjustable shocks Injectors cleaned and serviced. 2x new Fuel Pumps, 1x Prime, 1x Main 2x new batteries Car
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov
6
Roll CageLog Book
For sale is my Van Diemen RF87. This car is yet to race in Australia, with French and New Zealand history, this car has undergone a ground up restoration and is now ready to hit the track as a competitive Fc Formula Ford. The car has a Motorsport Australia Logbook and Certificate of Description. Works Completed: - New Engine (set up time only) - Refurbished Hewland Mk9 4spd - New wiring and plumbing - New rod ends where required - New brake rotors, new pads, refurbished calipers - Kits through
17
Roll CageLog Book
xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car
5
Registered
1979 fully restored rx7 series 1. Has hade full respray including jambs and engine bay. Restoration of interior. Original roof lining and door skins. Fully rebuilt factory 12a only done 500kms. Original wheels. Fantastic car.
11
Registered
2017 Supercharged Ford Mustang. 9500kms. Edelbrock supercharger. Contact for any details.
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute