SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

20 items for sale

Refine Search

Clear All
Keyword
Category
14
3
1
4
1
1
Popular Vehicles
2
1
1
1
1
1
1
1
4
2
15
18
8
13
4
13
2
4
12
3
11
7
8
Price
Minimum
Maximum
Listing Type

All Results

19
Roll Cage
Log Book
Now available at Muscle Car Warehouse is one of the most iconic and most successful Chev Monza to grace Australian circuits was the wild-looking Bob Jane sports sedan. It was the last car Bob Jane raced in anger, before hanging up his helmet. The big-winged monster, built with a liberal dose of Aussie ingenuity, was also raced by fellow greats Peter Brock, Allan Grice, Dick Johnson, Bryan Thomson and Brad Jones. It all started way back in 1978 for Bob Jane and this Monza in the United States aft

Kogarah NSW, Australia
Share
Watch
6
Roll Cage
Log Book
1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi

Bathurst NSW, Australia
Share
Watch
11
Time has come to sell the reserve race car. Was purchased as a stat write off (fresh water damage - sunroof left open) 195k on the clock Heavy duty clutch BC coilovers Whiteline front and rear sway bars and link pins with rear braces Front strut brace Afm gauge Boost gauge Turbo back exhaust (has scrapes on mid pipe so minor exhaust leak) Invidia mufflers May have a tune on it but would suggest having your turner check. Car drives very nice. gearbox feels great. Engine sounds clean and ver

Newcastle NSW, Australia
Share
Watch
10
Roll Cage
Audi TT-RS 5 Cylinder Race Car - Rare Manual 6Spd -AGI Half Cage -Sparco Circuit Seat -Audi Active adjustable damper system - Exhaust and Tune making good HP - 2 Piece Rotors and Pads F/R - 6x Forged wheels with Semi Slicks - very good mechanically with lots of upgrades, Maintainance records - Comes with original Seats if wanted -Trailer Available for extra $ - Open to swap/ trades - Can assist with transport and finance

Maitland NSW, Australia
Share
Watch
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.

Maitland NSW, Australia
Share
Watch
10
track car all wheel drive built for pheasant deputy 4 hr series aasa log book 2 sets of wheels radio intercom new clutch fitted new timing belt race brake pads cheap track car also suitable for production car racing

Ingleburn NSW, Australia
Share
Watch
14
I'm selling my RF89 Van Diemen, Chassis number 1415, logbook number H3442 Historic car # FC155.15.18 I imported this car from France in 2020 from the historic race car company Espirit Competition (Laurent Forte). It was a project car for the owner and his son to rebuild. For most of it's later life (2002-2016) it was a driver training car for Manadien Racing in France, who was the original buyer of the car in 1989. I have raced it in 11 races along the Eastern Coast with a race win at Morgan Pa

Carlingford NSW, Australia
Share
Watch
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

Tweed Heads South NSW, Australia
Share
Watch
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),

North Rocks NSW, Australia
Share
Watch
10 1
Roll Cage
Log Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh

Harrington Park NSW, Australia
Share
Watch
4
The car was imported by Sir Jack Brabham for David Brabham to race in the 1986 FF championship,the car has been in my position since 1987, just recently been restored to original condition. Engine : has been rebuilt by Larner Engines Chassis: striped,sand blasted & painted All new alloy panels, uprights, gearbox, oil tank have been vapour blasted & treated New Rack & pinion Brakes overhauled with new discs Alloy wheels (6) fitted with new tyres New body work. The documents are currently waiti

Windermere Park NSW, Australia
Share
Watch
9
Roll Cage
Log Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve

Belrose NSW, Australia
Share
Watch
7
Roll Cage
Log Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s

Harrington Park NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Audi RS3 LMS TCR Chassis #144 - Highest Spec Audi of this model in Australia (4 in the country) - Sold new to Australia in 2019 - Previously driven by Garth Tander and JK Vernay (2019 QR Pole & Race win) - Every homologation update installed including Aero front bonnet catches, front, rear & side plastic windows (only Gen1 in Aus with these updates) - Ohlins Shock Absorbers installed, tuned and recently serviced by AD Racing Shocks ($25,000 new price, plus custom valving) - Multiple podiums in 2

Bowral NSW, Australia
Share
Watch
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!

Albury NSW, Australia
Share
Watch
6
Roll Cage
Log Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car

Douglas Park NSW, Australia
Share
Watch
5
Roll Cage
Log Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das

Kurri Kurri NSW, Australia
Share
Watch
10
Roll Cage
If you're looking for a good deal on a unique car, contact me soon! Current shipping rates in the region of AUD$10,000 to most locations in Australia. Converted FF2000 chassis with Mitsubishi engine for the former Japanese Formula Mirage Series. It is painted in the famous Leyton House light blue with decals. Mitsubishi 4G63 twin cam 16V fuel-injected 2-litre dry-sumped engine. 5-speed manual transmission with Hewland gears. Adjustable wings, dampers, suspension, bars and brake bias. On-board fi

Sydney NSW, Australia
Share
Watch
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.

Springwood NSW, Australia
Share
Watch
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.

Arcadia NSW, Australia
Share
Watch