SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

333 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

6
Registered
For sale is my 2007 ‘MK5’ Volkswagen Golf R32 Turbo. Spec: 2 door, manual, sunroof & recaro wingbacks! Power: 400wkw 850nm, flex fuel/tune. ODO: 14X,XXX Reasonings for sale is I’m now a first home owner & I never wanted to make this sacrifice but reality kicked in & I would love to do more home improvements. Engine Build: Refreshed 10,000kms ago. ECUMASTER Engine Management [by PowerTune Australia] Pauter Rods JE Pistons ARP Headstuds Garret GTW 3884r / T51R Mod Bosche 1000cc injectors Cu

Penrith NSW, Australia
Share
Watch
15
Registered
Roll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s

Albany Creek QLD, Australia
Share
Watch
10
Registered
Up for grabs is my 1997 Subaru Legacy TS type R B Limited, these were the final edition of the 2nd generation Legacy. A pretty rare model in the rarest Cashmere yellow as they were only available in silver, white or yellow. It also has the factory upgraded 16inch alloys. Car is sitting at 154,800 kms Cambelt was done 2017 The car is still completely original and untouched, car is also still in really good condition and interior is in mint condition car is located in Christchurch New Zealand. Ca

Christchurch, New Zealand
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Williamstown SA, Australia
Share
Watch
11
Registered
This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20

Arundel QLD, Australia
Share
Watch
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has

Kogarah NSW, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to

Macksville NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

Burleigh Heads QLD, Australia
Share
Watch
15
Was $36,950$33,000
Registered
Roll Cage
Puma 2 for sale $34,450 ono Puma 2 is powered by a Nissan s13 SR20DET (about 180rwkw) and has a 5 speed gear box. The colour is stunning and has the normal stone chips you’d see on a driven example. Puma 2 has: • 15x7 koya wheel (matching spare on the back) • Canvass roof • Racing rear roll bar and cross bar with fire extinguisher mount Puma Clubmans are a larger chassis to suit normal sized humans. The not so good is that Puma 2 could probably do with a new clutch, which I have and will

Canberra ACT, Australia
Share
Watch
18
Was $135,000$115,000
This is the 3rd car built by Jack Pryor and Clive Adams and was apparently modelled of the Stan Coffey Cooper Bristol that Clive had driven on occasion. It as completely restored for me by Paul Trevethan in Melbourne and debuted at Winton in 2007 and has been running at the pointy end of Group Lb fields ever since. This Prad runs a fully worked 6 cylinder grey Holden motor fitted with a very rare Phil Irving Repco High Power cross flow head, which is mated to a 4speed Borgward transaxle. No expe

Canberra ACT, Australia
Share
Watch
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Cairns QLD, Australia
Share
Watch
8
Registered
Log Book
2006 Ford Fiesta XR4 150K KM 12 months rego from Thursday 14 March Body and paint is good and presents very well, few stone chips as expected, front bumper needs a paint Interior is excellent condition, won't come with the Sparco but will include the seat base if needed. The original seat will come with the car and fitted. I have a brand new rear boot badge and rear vision mirror to fit + Cosworth Cams + Cosworth manifold (genuine) + 4-1 Miltek exhaust + Larger upgraded throttle body +

Maroubra NSW, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
20
KEY FACTS * A highly modified, track-focused example of the transaxle modern classic sports car powered by a stage five hybrid turbocharged and fitted with a 951 inter cooler 3.0-litre inline-four, sending up to 600bhp to the rear wheels via a five-speed manual transmission with an odometer displays of only 176,231 km from new. * This 1990 Porsche 944 S2 has been modified as a track day focussed build, at a total cost of around $200,000 AUD and is noted as a Porsche Cup Winner and while signi

Caringbah NSW, Australia
Share
Watch
12
Roll Cage
Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol

Kurrajong Heights NSW, Australia
Share
Watch
5
Registered
1972 Ford Ranchero Hi performance 460 big block, C6 auto transmission 2800 dominator Convertor, Strange 9 inch diff trutrac 3:7 gears, 35 spline Dutchman axles. Custom Tailshaft, vintage air A/C, auto meter gauges, Kenwood sterio system offers 6x 9 speakers. Lots of new parts too much to list here. More than $90,000 spent on car. A unique car to own in Australia. This thing is fast and turns the tyres so easy.

Sans Souci NSW, Australia
Share
Watch
15 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Upper Sturt SA, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch