30 items with Roll Cage for sale

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in

New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig

Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Car is one of 128 Porsche 944 S2's delivered in 1989 (build date is December 1989 & delivered to Hamiltons in early 1990). * Approximately 180,000km (I have full history & owners are well known within Porsche Club Victoria) * Fully rebuilt motor (slight power increase) & new clutch pre Covid with limited use since (cost $18,000) * M030 components including Brembo ABS brakes with slotted discs & new pads * Eibach springs, adjustable koni shocks (with spare springs & shocks) * I have a range of w

Holden Commodore HSV Clubsport LS1 5.7ltr manual Engine built by Ravage Raceworks 325 rwkw LS6 inlet manifold , cnc ported heads roller rocker crow cam , high pressure oil pump, baffled sump , harmonic reduction balancer , ARP rod bolts, performance throttle body etc. Exceedy clutch T56 gearbox eaten tru trac diff with external oil cooler and fan/pump Acott suspension built front end, adjustable coilovers front and rear bilstein shocks adjustable front sway bar, AP racing brakes front 375mm

Limited modified Targa spec Studebaker Avanti. Built 2017/8 with no expense spared. Current MSA and AASA logbooks. Chassis extended and reinforced for Wildridge fabrications full cage, tower to spring shackles. Body fully stripped, reinforced, hogtroughs deleted. Cabin mounted fuel chiller box with oversize alloy fuel line to run E85 if required. Custom composite right hand drive dash with navigator consol. Cobra full winged seats on tracks. MCA gold suspension with remote cannisters to rear. Ra

Built with no expense spared for Targa Tasmania 2005 2005 Targa Tasmania class winner, 2005 2nd outright Pittsworth sprints, 2006 1st outright Tour of the Tweed, less than ten track days since then New directional Falkens, Rego March 2024, personalised plate 81JPS Race prepared 2.5L Alpina motor, 5 speed close ratio crate gearbox to highest allowed spec, disc brakes (slotted vented fronts), ~100kg below factory kerb weight and ~2x factory power, s/s twin exhaust, race wheels in period gold-sp

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu