66 items for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
12
Registered
LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
15
Registered
Lovely example with some tasteful improvements maybe only RHD 1998 pace car in Australia has travelled just under 100K and all in pristine condition TELEPHONE TREVOR JOWETT ON 0412338332
42
Roll Cage
Overview: • This Chevrolet Camaro has been with its current owner for almost a decade after acquiring it from Tennessee and shipping the car to Australia • Under its previous ownership in the USA, the car ran in the Sports Car Club of America GT1 and GT2 classes • It sports a new AR Bodies muscle car shell on a Panoz chassis that was assembled by Penske Racing to an incredibly high standard • Under the bonnet sits a Chevrolet LS1 engine putting down 400hp to the rear wheels • The Camaro has bee
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
15
RegisteredRoll CageLog Book
Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
15
Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185
9
Registered
3L Convertable. Shadow black accents, GT2 Napa leather Seats, Ceramic paint protection, 1000 km.
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
35
Registered
Restorers dream! This 1969 Ford Mustang Shelby GT500 is fresh out of a barn and ripe for restoration to put back to its former glory. Having originally left the factory in Pastel Grey as you can see the car has been repainted in red at some stage of its life. Current owner of 25 years plus. The interior is mostly original and untouched but has had an aftermarket stereo fitted. Lurking under the hood is the mammoth 428 Cobra Jet big block engine with matching number and is backed by a four speed
72
Registered
The Ford XW Falcon GTHO Phase II is arguably the toughest of all the GTHO models Ford made. With all of the 267 examples produced having “solid” 351 4V Cleveland engines, 31 spline Top Loader gearboxes and differentials. Falcon GT enthusiasts would argue that the Phase II is their favourite. This example, restored approximately 15 years ago in its original colour of Diamond White with saddle interior. It was originally delivered to Duhig Ford in Essendon, Victoria and was built in August of 1970
16
Roll CageLog Book
1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das
10
Will be rolling for transport More pictures upon request View Torquay VIC Shipping nationwide can be arranged Thanks
5
Roll CageLog Book
John Mcintyres NZ championship winning car has brand new engine with stroker kit which was built by a very reputable engine builder has a rebuilt gearbox.... has been a very cool car to drive but now someone else's turn... car comes ready to race with heaps of spares.... engine has very close to 600hp.... bring a trailer for the car and another for the spares.
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)