35 items for sale

IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

Toyota Supra drag car, full chassis complete ready to race. 410 cube SBC running methanol ,all engine specs can be supplied , new Ray Edwards carburetor, hughes powerglide with convertor to suit, 9 inch 35 spline floating axle with 1/4 & 1/8th mile gear sets, new front runners and slicks, car runs straight and consistent with engine and trans assembly only doing 12 passes, Andra tech and paper work available

New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

This is a show car, it has been detailed every week since purchase. It is in pristine condition. If you want a car for shows, or you want a car well taken care of that you're thinking of modifying, or just a really reliable new Toyota WITHOUT THE WAIT, this is it! Done 10,000k's with no track or dirt time. Rallye Version with only protection mods, including PPF, ceramic coat and window tints. Clear vinyl wrapped by Prestige Classic Automotive Care immediately after purchase ALL OVER including

Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

1994 Toyota Celica ST205 GT4 Australian Delivered Group 'A' Rallye WRC Homologation Special... Number 77 of 77. Only 2500 WRC homologation specials were built worldwide and just 77 were sold new in Australia, this is number 77. Each of the 77 had a plaque attached to the center console with the individual car's number. This Vehicle has traveled less than 300km since the full engine, gearbox, and suspension rebuild. The Full engine rebuild included fitting New Wiseco Forged Pistons, Manley con

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro