34 items for sale

Selling my classic 1966 Fastback A code GT Coupe 2+2. Price = US$125k It’s an authentic A code GT with a 4-speed setup, fully documented. This car has been meticulously restored through a rotisserie process, overseen and rebuilt by an Aircraft Engineer, ensuring unparalleled precision and use of premium components. The restoration journey is well-documented with a series of photos. The Fastback is equipped with a 347 Stroker engine, coupled with a reinforced T5 5-speed transmission, Vintag

1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi

Open to genuine offer 1500hp Project ford falcon xy 461 Windsor full restoration f2 pro charger custom everything this car owes me well over $300,000 everything is there to finish all that needs to be done is put back together Custom radiator with 2 16inch spal fans Dart block 9.5 4bolt mains Callie’s crank and rods,diamond pistons Victor Chapman sr heads ported And intake Custom cam F2 pro charger 3000hp w/a intercooler Fueltec ft600 Turbo 400 als race glides with Neil chance r

33-34 Ford Pick-up all Henry steel, 4 bar, disc brake dropped axle front, 350 Chev Vortec, TKO600 Tremic 5 speed, Currie 9" diff with Positrac, air conditioning, new distressed look trim, new headlining. Tough little truck. Can come with saltlakes, or original style wires. $105,000 negotiable. plates not transferable, selling without rego.

worked 351 cleveland, ported heads, edelbrock manifold, holley carb, solid flat tappet cam, roller rockers, msd ignition, balanced and blueprinted bottom end. top loader, shortened nine inch disc brake with strange axles, alloy performance radiator. This is a really fun car to drive, lots of power and sounds tough! This is a great start to a resto or custom build, nice straight almost rust free body with a tough driveline and a mint interior. either drive as is or fix a couple minor dints and r

Ford GT40 replication car made by Roaring Forties (#098), built by Wil Escabache (ICCARS) This car is an absolute beast of a car, fully rebuilt suspension, engine, transaxle, wheels just months ago and has traveled just over 1,500klms since The engine is a twin turbo charged 5.0L Windsor with custom intake, Roush Worlds Heads, Competition Cams solid roller cam and Endurex roller lifters, T&D Shaft mount rockers, JP custom forged pistons, forged H-Beam rods with 2000 series rod bolts, DART SHP 4

PRICE REDUCED - AMG GTC 2018 Coupe Ready for New Adventures! This pristine sports car, once the pride of the road, awaits its next champion. It’s been meticulously cared for and cherished, but alas, it’s time for a new journey. Only one owner, this beauty has been sheltered in prestige car storage, eagerly awaiting the roar of its engine once more. Immaculately maintained, its condition is a testament to the love it's received. But wait, there's more: Feel the brake power with Carbon Cerami

LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

1989 2wd Sierra Sapphire Cosworth Delivered in September 1989 at TCH Sheffield Purchased by owner no.2 in 1993 from Specialist Cars in Micheldever who kept it in the UK before shipping it to Australia in 1999. It was then sold to owner no.3 in 2009 then sold to owner no.4 a few years later. I purchased the car in March 2017. The car has a folder full of history going back to the early 1990’s with a history report from TCH dating from November 1989. 73,000 miles Fully rebuilt engine. All compo

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the