42 items for sale

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

I'm selling my RF89 Van Diemen, Chassis number 1415, logbook number H3442 Historic car # FC155.15.18 I imported this car from France in 2020 from the historic race car company Espirit Competition (Laurent Forte). It was a project car for the owner and his son to rebuild. For most of it's later life (2002-2016) it was a driver training car for Manadien Racing in France, who was the original buyer of the car in 1989. I have raced it in 11 races along the Eastern Coast with a race win at Morgan Pa

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

The car was imported by Sir Jack Brabham for David Brabham to race in the 1986 FF championship,the car has been in my position since 1987, just recently been restored to original condition. Engine : has been rebuilt by Larner Engines Chassis: striped,sand blasted & painted All new alloy panels, uprights, gearbox, oil tank have been vapour blasted & treated New Rack & pinion Brakes overhauled with new discs Alloy wheels (6) fitted with new tyres New body work. The documents are currently waiti

Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the

Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.