SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

121 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

6
Motorsport Australia and AASA log booked excel series race car - AGI National bolt in roll cage - Current spec Supashock control package - Mitch's Excel garage Camber bolt kit - Mitch's Excel garage 10mm Machined Lip Wheel Spacers - Brand new seatbelts - 18mm Whiteline Rear Sway Bar - Short shifter - New drive shafts, wheel bearings, wheel spacers, extended wheel studs recently fitted - refreshed and sealed gearbox - Misch's Excel garage Camber bolt kit - 1 meeting old Dunlop spec tyre - spare g

Bargo NSW, Australia
Share
Watch
7
- Relevant 2024 spec Excel showed its true speed at the recent Hi Tec QR Round, qualifying 5th only 3/10ths off pole with WAY too much fuel -1025kg- and a 58yo driver - It has been put together with attention to detail and only quality parts - 2024 spec Lindsay Martin Motor is 3 meetings old - Scotts Rods welded cage - 2 sets Konig wheels with AR1 tyres - MA Log Booked, engine and gearbox seals - Bespoke custom fit cover Etc Etc Etc call for specifics - Motor is as powerful as anything about

Noosaville QLD, Australia
Share
Watch
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

Point Cook VIC, Australia
Share
Watch
14 1
Roll Cage
Log Book
Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

Wisemans Ferry NSW, Australia
Share
Watch
15
2014 wrx manual rolling shell , no need to wait to have a cage built this is ready to build into a race car Has just had a national level tig welded roll cage fitted to the highest standard Includes fabricated alloy/ boot rear seat delete (18k in cage and fab) Custom seat base and momo race seat Full wiring harness , dash . All suspension factory and rear diff / drive shafts. Vehicle and was originally a write off , front damage lh end of the rail, has been checked out on jig and is stra

Sunshine VIC, Australia
Share
Watch
10
Roll Cage
Log Book
FOR SALE - 2014 Nissan 370Z Production Touring Car. This car has been built to Motorsport Australia Group 3E Production Touring regulations complete with Motorsport Australia approved roll cage, Motorsport Australia log book and a AASA log book. It has just over 5000kms on the odometer since new. Mechanical - This car has a powerful 3.7L V6 twin throttle body engine with twin pod air intakes, extractors and a full exhaust system which sounds amazing. It gets the power to the ground via a bra

Seven Hills NSW, Australia
Share
Watch
11 1
Roll Cage
Log Book
Subaru WRX Race Car - Race/Track/Tarmac rally - MY04 Java Black Pearl READY TO RACE - No repairs needed - The regular specialist race mechanic is happy to chat with any interested buyers about work on this car. - Very well maintained and serviced regularly - CAMS Log book - Low Kms with only 43k on the clock Reluctant sale due to a job change, making it too difficult to attend race days. - EJ20 re-built with STI heads + Cams - Race pistons + rods, and bearings (by STI Docklands) - Custom bu

Cheltenham VIC, Australia
Share
Watch
5
Was $48,000$42,000
For sale Built 2021/22 2022 Vic state championship winner 2022 Vic club championship winner Motorsport Australia log booked Top ten contender at national level Car was built and regularly maintained by Les Small performance to the highest standard. No expense was spared on the build, everything was new and has been updated and well maintained since completion. Car continually on the podium and winning races in all states. Fresh engine and gearbox only 1 meeting old, ready for the 2024 seas

Knoxfield VIC, Australia
Share
Watch
6
Roll Cage
Log Book
Genuine RX-2 Body Shell Group Nc Historic Touring Car 12A Bridgeport, 51mm IDA Weber, Lightened Rotating Assembly 4 Speed 4.7 Locked Diff Volvo 4 Spot Front Brakes Koni Shocks Front and Rear Steel Roll Cage Log Booked 13 x 7 Hotwire Wheels Recently Retrimmed front Race Seats Raced at Morgan Park Raceway and Leyburn Sprints by Bob Heagerty Fun Little Mid Field Race Car

Warwick QLD, Australia
Share
Watch
4
Roll Cage
Log Book
2022 built Hyundai New motor fitted at the start of 2023 It is a very competitive car finishing in the top three at multiple Victorian state rounds. Log book car AGI roll Cage Super shock suspension Mycron 5

Lilydale VIC, Australia
Share
Watch
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI

Rowville VIC, Australia
Share
Watch
26
Registered
Roll Cage
Log Book
Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

Lilydale VIC, Australia
Share
Watch
11
Time has come to sell the reserve race car. Was purchased as a stat write off (fresh water damage - sunroof left open) 195k on the clock Heavy duty clutch BC coilovers Whiteline front and rear sway bars and link pins with rear braces Front strut brace Afm gauge Boost gauge Turbo back exhaust (has scrapes on mid pipe so minor exhaust leak) Invidia mufflers May have a tune on it but would suggest having your turner check. Car drives very nice. gearbox feels great. Engine sounds clean and ver

Newcastle NSW, Australia
Share
Watch
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. Time Attack ready CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear wit

Sydney NSW, Australia
Share
Watch
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.

Maitland NSW, Australia
Share
Watch
9
FOR SALE: Front Running Hyundai Excel Racecar - $20,500 ONO We're offering this professionally built Hyundai Excel Racecar whether you're a seasoned racer or a beginner built to the high standard, turn the key and go. Key Features: - AGI National bolt in roll gage - Fully logbook and rebuilt engine sealed by ACT Autoworks only done 3 races since rebuilt - Racetech circuit seat - Custom Airbox Setup - Quick release steering wheel - Alloy floor plate - Short shifter - Race built gearbox

Kellyville NSW, Australia
Share
Watch
5
Roll Cage
Log Book
Hyundai Excel X3 Racecar Front running SA car MA logbook Eastwood Misch-spec engine All the Misch’s Excel Garage go-fast bits, including: -3 core alu radiator -exhaust -air intake -short shifter -Konig wheels Weld-in Mike Vidau cage Brown Davis floor pan SE bushes throughout Solid engine mounts Velo Apex seat Velo harness (new 2024, but red...) Raceline window net (current spec) NACA duct window insert Motorbatt AGM battery New Walbro fuel pump, foam filled tank SAAS gauges- tacho, water,

Happy Valley SA, Australia
Share
Watch
31
Roll Cage
Log Book
This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua

Brookfield QLD, Australia
Share
Watch
16
Roll Cage
Log Book
New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo

Glenwood NSW, Australia
Share
Watch
14
Was $76,500$57,950
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch