60 items for sale

Ford TF Cortina LHD, Full Tube Chassis Sports Sedan. 3D Sports Sedan Log booked in 2001 Steve Vigurs Built Chassis Inboard, Cantilever Front Adj Coil overs, Rear Coil overs. RB Engine, Forged Bottom End, RB25 Head, PRP Trigger Kit, Custom Turbo Manifold and Exhaust Intercooler, Pulsar 3582 Turbo, Turbosmart Gate and BOV Haltech Elite 2500, IC7 Dash etc and Full rewire undertaken in 2022 PPG Sequential 6spd Gearbox, New clutch etc all done in 2022 Borgwarner M78 Diff, Cambered, Floater's, Recent

EVO 9 LHD Genuine full Voltex Aero kit with light weight panels and Lexen Fresh 2.2L Including New 2.2 Crank New I Beam Rods New CP Forged Pistons New Modified Oil pump Assembly New Timing Belt and kit New Water Pump AMS manifold AMS intercooler Freshly rebuilt Garret EC1 Turbo Nitto 1.3mm Stopper Head Gasket Kelford 272R CAMS OEM VRS Gaskets Engine Oil TOTAL 10/60 Racing New OEM Evo 6 Koyo Radiator New OEM Idle Air Control Motor 2000cc injectors 2 x Bosch high volume fuel pumps New Ra

LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec 800 ECU and C125 Das

PRICE DROPPED !! Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors

This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)

Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut

Genuine Fully Built FQ360 Only a limited number of these released in the UK market Personal Import from the UK in 2014 55,000 miles (92kms) FQ360 original carbon front and rear lip as well as FQ360 interior in great condition 2lt 5 Speed Manual (Built by Neat Gearboxes) Tomei Cams ARP 625 Head Studs Nitto I Beam Rods Nitto Pistons Upgraded Timing Chain Turbo 1 Manifold Garret 3071R Invidia Exhaust FIC 1350cc Injectors K-Sport Coilovers Twin Plate Extreme Clutch Mishimoto Intercooler Work ZR10 18

Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount

Improved production 3J 6cyl, Falcon Motorsport Australia log booked. Can be run in APRA, Production Cars, Improved Production Etc. Has run in Vic state series last 2 years, doing 2:02 at the island and 1:31 at Sandown. Will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and wheels with tyers. (does not include camera setup) Fully sorted car. Selling because I am upgrading. Located Russells Bridge Vic 3331

For sale is this very tidy Wolf F1 Mistral. Equipped with PSA 1.6lt Turbo engine Car has run 3600km / 23 hours It has all the options and is ready to race. Details on car below: https://www.jammotorsport.com.au/wolf-sm Customer has no time for racing at the moment so has to move it on. Genuine enquires only. Based at Jam Motorsport @ The Bend Motorsport Park. Jam Motorsport storage, support and arrive and drive available.

This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th

Ford Falcon Supercar - refitted as a BF. Currently running in Sports Sedans as 3D Roush Yates Ford Nascar D3 358 engine making 825 HP with low hrs since re-build Motec M150 ECU Motec C125 Dash Motec PDM Holinger RD6 with Holinger paddle shift Tilton Clutch Tilton pedal box AP COTF 18in brake package Ohlins TTX dampers built by AD Racing Shocks Morrison 8 throttle body intake manifold with dirve by wire Dailey engineering dry sump Fire bomb Car is in great condition A fast car ( top 10 finish in

Race Car Transporter - 45 foot - Fully fitted out - Fits 2 cars. Electric Hydraulic Tailgate (refurbished) - lift up to 2 ton. Honda Generator, Air Compressor, 240 volt lighting and power plugs. Large Fridge Freezer. Stainless Benches and 6 Large Lockable Tool boxes. 20 ton Press. Cabinets and Wheel storage. Battery Charger and internal lighting. LED Lights, new tyres and service. Just had roadworthy and Registration. Australia wide delivery available. Located in Melbourne, heading to Perth next

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das