96 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
4
Roll CageLog Book
250 crossflow engine Fresh rebuilt engine has not been run after rebuild Trend pushrods ISKY Solid lifters ARD head studs Inner valve springs Level 3 port work on cyl head Bored, planned block Billet fly wheel Headers 3" system 250 Camtec cam shaft Isky pistons Romac balancer Chank, flywheel, clutch balanced to gether Custom clutch ACL mains Rollmaster timing chain EVL valves Street terra rockers Moly rings Compression 10.7:1 Holley 570 Avenger 4bbl Electronic ignition Upsized AFCO radiator/ the
20
This is a re-bodied Lotus with original Lotus identification plates. The car has had an extensive rebuild with every part checked and/or replaced. BODY The body is painted in genuine Lotus colours and has alloy boot, bonnet and doors. Spare steel doors are included which are painted. The interior and underside have also been painted. The rear A arm mounting points have all been strengthened. A substantial steel roll cage picks up major mounting points and has side protection bars. ENGINE The e
10
Mustang Group NC Been a race car most of its life Previously raced in another class but I have been accumulating parts to run in Group NC including Marty White built NC legal 351 Windsor with quad 48 Webber's plus a brand new Super Victor if Webber's are not wanted Close ratio top loader with rose jointed shifter 9 inch true track New Group N legal brakes front and rear Koni shocks set up by Glenn Seton Original rear seat in immaculate condition Original dash etc plus brand new dash pad
19
Roll CageLog Book
Now available at Muscle Car Warehouse is one of the most iconic and most successful Chev Monza to grace Australian circuits was the wild-looking Bob Jane sports sedan. It was the last car Bob Jane raced in anger, before hanging up his helmet. The big-winged monster, built with a liberal dose of Aussie ingenuity, was also raced by fellow greats Peter Brock, Allan Grice, Dick Johnson, Bryan Thomson and Brad Jones. It all started way back in 1978 for Bob Jane and this Monza in the United States aft
3
Roll Cage
Brand new motor 30k fully recond gear box 7k both one meeting old car well maintained as new body comes with 2 spare sets of wheels 5 gear sets and 7 sets of springs plus sway bar
4
Roll Cage
Fully recon motor 18k fully severed gearbox 4.5k both 0km car well maintained body like new 2 spare sets of wheel 5 gear set 7 set of springs extra sway bar
6
Roll CageLog Book
1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi
10
Roll Cage
For Sale 1969 Boss 302 Mustang built for Group Nc. Completed in 2019, done less than 10 laps of Baskerville Raceway and less than 10 laps of Symonds Plains Raceway, then stored, as new. Built utilizing numerous Kar Kraft blueprints from the original Ford Trans Am Boss 302’s where possible. Painted in correct 1969 Shelby Trans Am Boss 302 Blue with other period styling cues from the Shelby, Bud Moore and Allan Moffat cars. Built with all top shelf mechanicals throughout. Savy Motorsport Boss 302
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
18
Aussie Racing Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purpose built tilt trailer with winch. Sydney NSW Log book $16K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185
9
Roll CageLog Book
FG Ford Brute Ute. Ex SRT race Ute, 5ltr coyote cragsted engine, Tremec TR-6060 6 speed Transmission, AP brakes, Motec computer, Supa shocks, new radiator, brakes, wheels & tyres - slicks & semi slicks, power steering. Lots of $$ spent. Heaps of spares. Raced in HiTec oils tin top series, Stock Cars Aust muscle class. Motor Sport Aust Log Book. Great fun car to drive & race ready. Call for more info work hours 03 59 401 800
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
14
Roll Cage
Near completed rolling shell Ford XR8 Replica tourer. National spec cage with MA certification. Period correct full containment newly covered recaro seat. Supercar body kit and lexan windows. XYZ coilovers all round. Rear bulkhead completed, fresh 2k paint job and fully painted interior nardo grey 2k paint. Custom seat mounts. Lightened doors and new door cards. 6 pot mustang brembo front calipers, XR8 rear calipers. Genuine XR8. Brand new DBA 4000 t3 front rotors. Strengthened rear di
15
New Coyote 5.0L engine - 2 race meetings old Gearbox Reconditioned Light-weight / quick release boot lid Carbon roof turret Full function display Spark steering wheel Solid prop Shaft w/sleeved journals FIA onboard efficiency Cooling System PWR Hi Efficiency Cooling System Motec M150 ECU with 250 mb logging Ramp and Clutch type Limited Slip Differential (LSD) TIlton 3-Plate Sintered Clutch, Master Cylinder's and Pedal Box GPS vehicle speed system 9 Position Throttle mapping Pit Lane Speed Limi
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
17
1982 Ford Falcon Dick Johnson Redroo Tribute car currently racing in Touring Car Masters in New Zealand .number 117 I’ve owned this car for 16 years and raced it on every race track in New Zealand and raced at Sydney Motorsport Park, Bathurst 1000 Twice , Bathurst International once and Adelaide 500 once all with Touring Car Masters Australia. Development the car over the years to a fun reliable Muscle Car . Numerous trophies gathered over the years .The car has fully homologated Motorsport NZ
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.
14
Roll CageLog Book
This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt
3
Roll CageLog Book
V8 SUPERCAR DRIVEN BY JAMES COURTNEY, SHANE VAN GISBERGEN, SCOTT MCLAUGHLIN Stone Brothers Racing Ford Falcon BF Chassis SBR15BF507, ex-Shane van Gisbergen SP Tools chassis with an amazing SBR V8 Supercar history and driven by some of the biggest stars of the sport. The car has had a full chassis up body restoration by Richard Atkinson in New Zealand. Bathurst runner-up car in 2007 driven by James Courtney and David Besnard for SBR. The car became Shane van Gisbergen’s SP Tools car for the s