31 items with Roll Cage for sale

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.

1970 XW - 750hp 434 Dart/Eagle/CHI 3V +Port Nos (1000hp) (100k build) Turbo 400, 9in True trak Does a 9.25 quarter (with 150hp shot nos - will do high 8’s with 250 shot) won drag challenge twice, been featured in Street Machine Twice. Gazzard suspension. 250k spent on the build. https://www.streetmachine.com.au/features/1970-ford-xw-falcon-streeter-runs-nine-seconds https://www.streetmachine.com.au/events/drag-challenge/9-second-740rwhp-434ci-xw-falcon Also selling - Race Car Transporter -

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R

Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.

ESCORT Group 4 ex works Ford Australia car - INB 115 plate registered ex Colin Bond/Bob Riley/Greg Carr/Dick Johnson/Ian Hill/John Berne, one of 4 works detached cars built for the Australian Rally championship during 1976 - 1979 under contract to Colin Bond (Ford Australia) , also driven in select events ie Southern Cross International Rally , Alpine and Castrol International rallies. This car is original body shell and only one of two original cars remaining in existence. Safety equipment, eng

Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem

38 Chevy 350 power, steering air conditioning airbag suspension in excellent condition will not be disappointed